- Turbidity Analyzer is connected directly via RS485 communication interface, providing simple, reliable, cost- saving process data with remote monitoring, calibration, configuration and diagnostics capabilities. The Turbidity Meter housing in a robust IP68 proof enclosure, 1500 N tensile strength Kelvar reinforced cable, up to 1.2 km digital data transmission, the transmitter is ideally used in water/wastewater industry.
- Robust IP68 Water Submersible Enclosure, Solution Without Cabinet
- 1 sec On-line Realtime Measurement
- 0.2 W Ultra Low Power Consumption, Ideal for Outdoor Applications
- High Reliability, Drift Free
- Lightening and Surge Protection for Power and RS485 Communication
- 1.2 Km RS485 Digital Communication, Minimize Cabling and Engineering Cost
- Software Configuration, Calibration and Data Monitoring
- Standard Modbus RTU Protocol, Direct Connected with PLC, HMI, Eliminate I/O Module Cost
- Auto Cleaning Wiper, Almost No Maintenance
- Sapphire Glass Lenses to Prevent Scratch
- Pressurized Flow Chamber, Prevent Noise Caused by Bubble
- Onboard memory allowing users to easily calibrate and configure sensor at lab and distribute to various fields sites
Thông số kỹ thuật
- Type :
+ SMR10-1: Flow Chamber Type
+ SMR10-2; SMR10-4: Immersion Type (with Wiper)
+ SMR10-3: Pipe Insertion or immersion Type (with Wiper)
- Measurement range :
+ SMR10-1: 0~1/10/100 NTU
+ SMR10-2: 0~100/1,000/4,000 NTU (auto range)
+ SMR10-3: 0~10/100/1,000 NTU(auto range)
+ SMR10-4: 0~10/100/1,000/4,000/10,000/50,000 NTU (auto range)
- Accuracy :
+ SMR10-1: ±3% FS
+ SMR10-2: ±3% FS(0~1,000 NTU), ±5% FS (1,000~4,000 NTU)
+ SMR10-3: ±3% FS
+ SMR10-4: ±3% FS(0~1,000 NTU), ±5% FS (1,000~4,000 NTU),±10% FS (4,000~50,000 NTU)
- Resolution : 0.001/0.01/0.1/1/10/100 NTU
- Repeatability : SMR10-1/2/3: ±3% FS ; SMR10-4: ±5% FS
- Reflection angle : 90°
- Process flow rate : SMR10-1: Max 20l/h;SMR10-2; SMR10-3; SMR10-4: Max. 3 m/s
- Operation pressure : Max.10 Kgf/cm2
- Operating temperature : 0~ 85 °C
- Response time : 3 sec
- Protection : IP68
- Temperature sensor : pt100
- Temperature measurement range : 0 ~ 85 °C
- Temperature accuracy : ±0.5 °C; ±0.1 °C(optional)
- Housing : SMR10-1: SMR10-1: POM ; SMR10-2~4: SS316L; Titanium (optional)
- Dimension : SMR10-1: 130(W) Χ140(H) X 60(D) mm ; SMR10-2, SMR10-3: Φ 35 Χ 215 mm ; SMR10-4: Φ 35 Χ 185 mm
- Weight : SMR10-1: analyzer: approx. 350g ; SMR10-2~4: analyzer: approx. 500g; Cable: 80g/m