- The vibration control RSP1 is a compact multiple timing relay for capturing operation times ofsuction plants and for triggering vibrators.
- All times are permanently saved in an EEPROM. Thus the accumulated operation period of the suction operation saved when switching off the supply voltage, e.g. during the night or weekend.
+ addition of the running time of 1, 2 or 3 suctions.
+ introduction of vibration procedure after having reached the set total time (adjustable 4 to 120 min.) and after completion of the last suction operation.
+ external vibration command by closing a contact, e.g. by filter monitoring work
+ spintime adjustable 10 to 300 sec.
+ interval vibrations 5, 15 or 20 times (disconnectable)
+ interval vibration time (adjustable 1 - 30 sec.)
+ interval break time (adjustable 1 - 30 sec.)
+ continuous vibration (adjustable 10 - 300 sec.)
+ no vibration during suction operation.
+ if vibration procedure is interrupted (e.g. by switching on suction), the same will be recommenced at the next possible opportunity.
- inputs for up to 3 suctions.
- permanent saving of all times in the EEPROM.
- LED-display
- 2 pushbuttons for programming.
- coding switch for adjustment of all times
- RESET-button, resets operation period to zero or interrupts a running vibration procedure.
- VIBRATION-button, starts vibration procedure (only if suction is not active).
Thông số kỹ thuật
- Supply voltage Us.......AC 220 - 240 V, ± 10%, 50/ 60 Hz, < 3 VA
- Relay output.......1 NO
- Contact type.......type 2 see general technical informations
- Test Conditions.......see general technical informations
- max. ambient temperature.......-20°C...+55°C
- InputsContact 6, 7, 8 against 5.......approx. DC 24 V/3 mA
- Contact 1 against 4.......approx. DC 5 V/5 mA
- Casing dimensions (W x H x D).......Design S 12: 41.5 x 82 x 121
- Protection housing/terminals.......IP 30/IP 20
- Mounting.......on 35 mm standard rail according to EN 60 715 or with M4 screws.
- Weight.......approx. 300 g