FF CRC, pathological digital test signals.
Y, C, both, text, circle, moving pattern signal continuity test.
16 test patterns: 100% Bars, 75% Bars, Split Bars, Bowtie, Sweep, Pluge, Multi, Pulse & Bar, Modulated Steps, White Screen, Red Screen, Convergence, Split equaliser/pll test pattern, Ramp, Limit Ramp, Optional pattern*.
Multi Standard SD SDI, and Composite video generation.
Embedded Audio.
AES/EBU or Single channel Analog Audio.
1U high full width rack case.
User program 16 alphanumeric ident scrollable.
Audio selectable on all groups 1 thru 4.
110 –240V mains powered IEC connector.
Thông số kỹ thuật
OUTPUTS
Serial digital BNC connector. Output impedance 75 ohms. SMPTE. 259M, ITU-R BT.601/656 serial component.800mV pp.
Full 10 bit pattern generation.
Addition of CRC checksum word.
Addition of embedded tone at -18db.
Composite BNC connectors. Output impedance 75 ohms. 1 volt p/p +/- 1% PAL, NTSC or PALM from 9 bit dac.
Differential gain and phase +/- 1% and +/- 1 deg.
Sch phase 0 +/- 5 deg.
Audio 3 pin xlr plug.
SD SDI Standards covered:
625 lines 50Hz Interlace
525 lines 60HZ
PAL 50HZ
NTSC 60Hz
Analog: 1KHz tone 0db to +8db balanced to 600 ohms Thd <0.5%.
Digital: AES/EBU encoded 1KHz tone, balanced output to 110 ohms.
Frequency The crystal master oscillator is accurate to better than +/- 15ppm.
ENVIRONMENT
Indoor use, 5 to 45 deg.C. Ambient to 2,000m.
Max humidity 80% to 31 deg.C decreasing to 50% at 40 deg.C.
Overvoltage category 2. Pollution degree 1.
POWER
Current draw is 600mA.
Mains supply 240-110VAC +/-20% 50/60Hz 10VA max.
PHYSICAL
DIMENSIONS: - 49 x 25 x 4.5cm.
WEIGHT: - 3Kg.
Mời bạn tham khảo sản phẩm mới DigiScope DS900G