Hotline: 0984.843.683 Email: info@ttech.vn  Zalo: 0984.843.683

Máy hiện sóng Digital Oscilloscopes DS-5600 Series Iwatsu

Mã sản phẩm: DS-5600
Sử dụng cho Model:
Hãng SX:
Xuất xứ
Bảo hành
Tình trạng

Tình trạng: Còn hàng

Đặt hàng


Tên Sp: Digital Oscilloscopes DS-5600 Series Iwatsu

Mã SP: DS-5600

Hãng: Iwatsu

Liên Hệ Hỗ Trợ

    • SĐT: 0984 843 683

    • Mail: info@ttech.vn

      • Zalo: 0984.843.683

Thông tin sản phẩm


  DS-5654 DS-5652 DS-5634 DS-5632 DS-5624 DS-5622 DS-5614 DS-5612
Frequency bandwidth(-3dB) 500MHz 350MHz 200MHz 100MHz
Rise time(Typical)) 750ps 1ns 1.75ns 3.5ns
Input Channel 4 2 4 2 4 2 4 2
Maximum Sampling Speed 2GS/s (when 2 channels interleaved), 1GS/s (when all channels are in use)
Equivalent Sampling Rate 100GS/s
Peak detect resolution 1ns
Averaging 2 to 65536 times (exponent of 2 step)
Maximum Memory Length 5M points (when 2 channels interleaved), 2.5M points (when all channels are in use)
Vertical Resolution 8-bit (When high-resolution calculation is valid: Maximum 12-bits)
Input voltage range 2mV/div - 10V/div(1MΩ), 2mV/div - 2V/div(50MΩ) 2mV/div - 10V/div(1MΩ)
Offset voltage 2mV/div - 50mV/div : ±1V
50.2mV/div - 500mV/div : ±10V
502mV/div - 10V/div : ±100V
DC gain accuracy ±1.5% + (0.5% of fullscale)
Maximum Input Voltage ±400Vpeak CAT I (1MΩ), 5Vrms (50Ω) ±400Vpeak CAT I (1MΩ)
Band-limiting filter Analog form : 100MHz,20MHz,2MHz,200kHz Analog form : 20MHz,2MHz,200kHz
Digital Form: Select either LPF, HPF or SMA, 4 independent channels
Input coupling GND, DC 1MΩ, AC 1MΩ,DC50Ω GND, DC 1MΩ, AC 1MΩ
Input Impedance 1MΩ±1% //16pF、 50Ω±1% 1MΩ±1% //20pF
Probe sense Automatic: 1:1、10:1、100:1、1000:1
Manual: 1:1、5:1、10:1、20:1、50:1、100:1、200:1、500:1、1000:1、2000:1
Timebase 500ps/div ~ 50s/div 1ns/div ~ 50s/div 2ns/div ~ 50s/div 5ns/div ~ 50s/div
Standard probe SS-101R (multi-channel supplied as standard) SS-0130R (multi-channel supplied as standard)
Roll mode 50ms/div ~ 50s/div (100kS/s max)
Timebase (Clock) accuracy ±10 ppm
Trigger function
Trigger type Edge, Edge ALT, Edge OR, Pulse Count, Pulse Width, Cycle, Dropout, TV, 
Pattern (OR, NOR, AND, NAND), Serial (UART, SPI, I2C)
TV mode /
Line number /
Field sequence
NTSC, PAL, Custom / Up to 3,000 / 1, 2, 4, 8
Pulse Count Trigger 1 to 9999 events
Pulse Width Trigger 15ns to 50s
Period Trigger 40ns to 50s
Dropout Trigger 50ns to 50s
Pattern Trigger  OR、NOR、AND、NAND
Trigger source /
State / 
threshhold level setting
All Channels / HIGH, LOW, Don't Care / All Channel Independent Setting
Serial Trigger  
UART Trigger Selection START, STOP, Parity Error, Data Pattern
Bit Rate 1,000bps to 1Mbps (set in units of 100bps)
Comparative Data Length 5 to 8 bits
Signal Source CH1 to CH4, EXT (CH1, CH2, EXT for 2 channel function)
SPI

* CH1 input is reserved for SCK signal
input: Maximum 20MHz
Trigger Selection Data Pattern
CS Selection Idling time specified when no positive logic/negative logic or CS
Comparative Data Length 4 to 64 bits
Signal Source CH1 to CH4, EXT (CH1, CH2, EXT for 2 channel function)
I2C Trigger Selection START, STOP, RESTART, NACK, Data Pattern
Address Mode Selected from 7-bit / 10-bit / EEPROM read
Comparative Data Length 1 to 5bytes when the address is 7-bit/10-bit, 1byte when EEPROM read (with shift comparison)
Signal Source CH1 to CH4, EXT (CH1, CH2, EXT for 2 channel function)
Trigger Source All channels, EXT (±0.5V), EXT10 (±5.0V), Line
Trigger Slope /Coupling +, - / AC, DC, High Frequency Rejection, Low Frequency Rejection, Noise Rejection
Display function
Display size/ resolution 7.5inch color TFT-LCD with Touch screen / VGA(640*480pixels)
Display mode YT、XY、XY (Triggered)
Vector Display Method Sample Point Interpolation Display, Dot Display
Analog persistence mode Monochrome Grayscale Display, Spectrum Display
Persistence time setting 100ms, 200ms, 500ms, 1s, 2s, 5s, 10s & Infinite
Internal Waveform Storage (REF Memory) 5 waveforms
Front Panel Setting Storage Possible to save five settings in the internal memory, USB memory
PParameter Measurement, Cursor, Zoom, Calculation, Replay Functions
Prameter measurement Maximum, Minimum, Peak-Peak, RMS, Cycle RMS, Mean, Cycle Mean, Top, Base, Top-Base, +Overshoot, -Overshoot, Tr 20-80%, Tf 80- 20%, Tr 10-90%, Tf 90-10%, Freq., Period, +Pulse Count, -Pulse Count, +Pulse Width, -Pulse Width, Duty Cycle, Integral, Skew (+, -), Skew at level
Concurrent number of measurements /
statistics display
Four parameter maximum /Max (Maximum), Min (Minimum) ,Num (Number of the total waveforms)
Logging item, destination Time and parameter measurement results (conditions A, B, C, D), 
Pass/Fail judgment results When recording: Pop-up window,
internal memory (up to 86400 entries), After recording: USB memory
Pass/Fail Judgment mode: Select between Parameter judgment and Mask judgment, 
Judgment result: Save waveform (USB memory)/ Beep/ Pulse output (when equipped with DS-578 option)/ Logging, 
Page search function: Select any of Fail or Pass, you can search forward or backward
Cursor Time, Amplitude, Time and Amplitude, Value at cursor
Zoom Zoom key enable display at individual grid area
Calculation Addition, Subtraction, Multiplication, FFT(8k points maximum, RECTANGULAR, HANNING, FLATTOP)
Rescaling / Unit conversion a*x+b(x: input voltage at User defined a and b) / Volt, Ampere, Watt, degree and unit-less
Replay Automatic waveform recording upto 1,024waveforms, History Replayable
Counter 6-digit
Interface (standard) USB 2.0(Host&Device), LAN(100Base-TX), GPIB(Factory option: DS-576)
AUX Interface AUX connector for External options
Waveform Data Storage UUSB memory for Binary, ASCII, Mathcad, Calculation(ASCII) & Calculation(Mathcad)
Hardcopy Output Output form front panel USB port to USB memory in TIFF, BMP & PNG format or Output to PictBridge Printers
Calibration signal output Square waveform at 1kHz, 3Vp-p
Power / power consumption AC 90Vrms to 240Vrms, 47Hz to 63Hz, AC 90Vrms to 132Vrms, 380Hz to 420 Hz, 95VA max (60W max)
Dimensions (mm) / Weight Approx. 330W × 190H ×124D / Approx. 3.7kg
Environmental condition
Performance guarantee temperature +10℃ to + 35℃
Operation temperature and humidity / 
Altitude conditions
0deg. to +40˚C at 5 to 80%(RH<=30˚C) and 55%RH or less at 40˚C non-condensation /
2,000meter or lower
Accessory
Probe(multi-channel), Power cord, Front panel cover, CD-ROM(Instruction Manual, Remote Control Manual), User's Guide
Factory options
AUX IO CH1/CH2 output
DS-577
(factory option)
AUX IO1: Output of CH1 input signal with applied offset voltage, AUX IO2: Output of CH2 input signal with applied offset voltage
AUX IO CH1/TRIG output
DS-578
(factory option)
AUX IO1: Output of CH1 input signal with applied offset voltage,
AUX IO2: H-level pulse signal output occurs under the following conditions
・Output when triggered
・Output when Pass/Fail judgment result becomes Pass or Fail
GPIB Interface
DS-576
(factory option)
GPIB: IEEE488.2 (factory option)
2 ways optional for Probe Power supply
DS-579
Our active probe power supply (2 systems)


Bình luận