Hotline: 0984.843.683 Email: info@ttech.vn  Zalo: 0984.843.683

SafeSide Permanent Electrical Safety Device (PESD)...Safe Test Point - Grace Engineered

Mã sản phẩm: Safe Test Point
Sử dụng cho Model:
Hãng SX: Grace Engineered
Xuất xứ
Bảo hành
Tình trạng

Tình trạng: Còn hàng

Đặt hàng

SafeSide Permanent Electrical Safety Device (PESD)...Safe Test Point

Maker : Grace Engineered

Yêu Cầu Giá Tốt

Zalo/tell: 0984.843.683; Email: hien@ttech.vn

Thông tin sản phẩm

SafeSide Permanent Electrical Safety Device (PESD)...Safe Test Point 

Maker : Grace Engineered

After disconnecting power to an enclosure, electricians can pre-verify voltage isolation while the enclosure door is safely closed. The risk of arc flash is reduced because electricians know if there is power inside the enclosure before re-verifying isolation with a meter.


The Voltage Vision (R-3W) is unmatched in its reliability due to its dual redundant circuitry and no separate power supply. Voltage Vision (R-3W) gets its power from the same voltage that it indicates! Ask this question: Can you live without it?


Applications:


  • Circuit Breaker Disconnects - No Visible Blades

  • High Energy Panels (NFPA 70e Category III and IV)

  • Frequently Accessed Panels

  • Mechanical LOTO: Indicating Zero Energy

  • Panels with Multiple Power Source

VoltageVision® thru-door power warning alerts provide electrical safety information while the panel doors are safely closed. This “one-size-fits-all” solution detects 3-phase AC or DC voltage from 40-750VAC/30-1000VDC. The encapsulated construction and redundant circuit design means rugged reliability. Voltage is the common denominator in an electrical accident or an arc flash; no voltage means no accident, no arc flash. While performing electrical LOTO with a thru-door voltage detector installed, the electrician can pre-check the internal voltage state without opening the enclosure. Next, the electrician should replicate a zero voltage reading with his voltmeter as per NFPA 70e 120.1(5). This low-cost, redundant voltage-verification task reduces arc flash risk and increases electrical safety for workers.



  • 40-750VAC / 30-1000VDC

  • UL Hazardous LocationCAT III/IV* (Class 1 Division 2 Group A, B, C, & D)

  • Electrical Rating UL Type 4X, 12, 13

  • Potted Construction with 6’ Lead 

  • Simplifies Personal Protective Equipment

  • Stored Energy Detector (120.1(6))**

  • Visible Blades Disconnect (120.1(3))**

  • Permanent Devices is Less Prone to Damage

  • Voltage Source Labels (120.2(F)(1)(a))****NFPA 70E 2009 Edition

Bình luận