Thiết bị đo và phân tích acquy Franklin CELLTRON CAD-5000, CAD-5500, CAD-5200
Model Numbers:
CAD-5000 (Base Kit)
CAD-5200 (Enhanced Kit)
CAD-5500 (Complete Kit)
Applications:
Tests individual Lead-Acid or Nickel-Cadmium cells or Monoblocs (up to 16Volts) in any common configuration, approximately 10-6000Ah.
Voltage:
0.8 - 20.0 Volts DC
Conductance:
100 - 19,990 Siemens
Test Data Storage:
14000 tests stored internally, unlimited with USB drive connected
Accuracy:
+/- 2% across test range, Voltage and Conductance
Voltmeter Resolution:
5 mV
User Programmable Functions:
• Preset values for over 250 battery types
• Low voltage alarm setting
• Low conductance warning
• Low conductance failure
• Test mode (push button/auto start)
Calibration:
Franklin Electric will work with each customer to establish a regular calibration program if it is required by their quality or other management system
Cable Options:
• Dual contact clamps
• Dual contact probes
• Custom cables by quotation
Power Requirements:
• 7.2V, 2300AH, NiMH
• Internal swappable battery & charger
Display:
LCD - FSTN 2.619 in x 1.309 in, 128 x 64 pixels, 40 degree viewing angle, contrast ratio 8, Green LED backlight
Keypad:
Alph-numeric, Stainless-steel dome, polycarbonate overlay, 1,000,000 actuations
Data Transfer:
• USB Flash Drive (Type A)
• USB PC Interface (Type B)
• Infra-red, half-duplex IRDA protocol for printer
Environmental Operating Range:
0 to +40C, 95% relative humidity, non-condensing
Storage Temperature:
-20 to 50C
Over Voltage Protection:
• Auto-reset disconnect
• Reverse polarity protected
Housing Material:
Acid resistant ABS plastic santoprene overmold