Hotline: 0984.843.683 Email: info@ttech.vn  Zalo: 0984.843.683

Water Vaporizer Autosampler VA-236S Mitsubishi

Mã sản phẩm: VA-236S
Sử dụng cho Model:
Hãng SX: Mitsubishi
Xuất xứ
Bảo hành
Tình trạng

Tình trạng: Còn hàng

Đặt hàng
Cosa-Mitsubishi revolutionized the measurement of moisture in solids with the introduction of the VA-02 Water Vaporizer and CA-02 Coulometric Karl Fischer Moisture Meter in the early 1980’s. The VA-236S Water Vaporizer Autosampler and CA-200 Moisture Meter continues this trend by breaking new ground in moisture analysis of solids, liquids, fats and greases by Karl Fischer.

Liên Hệ Hỗ Trợ

    • SĐT: 0984 843 683

    • Mail: info@ttech.vn

      • Zalo: 0984.843.683

Thông tin sản phẩm

The standard 10 mL headspace vials and aluminum block heater provides stable, uniform heat to the sample thereby ensuring complete volatilization of both surface and bound moisture without exposing the sample to uneven heating; which could burn the sample and contribute to inconsistent sample results. The built-in Mass Flow Controller (MFC) , auto blank correction and up to five selectable groupings (ranges) on the carousel allow customization of the measuring parameters to the specifics of the samples being analyzed; such as using different flow rates and/or temperatures within the same analytical run. The duel needle design permits quick, easy cleaning and maintenance. Inlet needles of different length can be easily exchanged, depending on the specifics of the sample being analyzed. ASTM, ISO, DIN, JIS & UOP methodologies are all possible with the VA-236S; truly the ultimate Karl Fischer Water Vaporizer Autosampler.


Feature:

Analyze 5 ppm – 100% water in most matrices
Block Heater Design – 70 to 300 degree Celsius temperature range
Fast Analysis time - Typically 3-7 minutes
36 Position Sample Tray with Standard 10 mL Headspace Vials
Simple Dual Needle design permits easy maintenance and cleaning
Large sample size – up to 7 grams
Less Maintenance versus Direct Karl Fischer Injection
Reduces Reagent Consumption and Cost
Interfaces with 21CFR Part 11 Controller Compliant Software


Application:

Transformer Oils
Edible Oils and Fat
Pharmaceuticals & Lyophilized Proteins
Plastics, Polymers & Rubber
Lubricants and Greases
Solids, viscous liquids and samples not readily soluble in Karl Fischer Solvent and Reagents

Bình luận