Give yourself the advantage
The advantage of using PCWI cutters over using a knife blade:
the cutter exerts no side-ward pressure on a dried hard film. You won't shear the coating, causing the test to fail prematurely.
Lasts 50 times longer
Tungsten Carbide is two and a half times harder than hardened steel. This means that PCWI cutters stay sharp 50 times longer than the steel blade you are using now.
Any material and any job
The precision sharpened carbide cutter works beautifully on jobs like paint on wood. The cutter will also handle jobs on steel, thanks to its toughened hardness.
1mm, 2mm, and 11 tooth 1mm Cutters
These cross-hatch adhesion cutters will allow the adhesion of a wide range of coatings to be measured according to standards AS1580 method 408.4, BS3900-E6, ASTM 3359-B, DIN53 151, and ISO 2409. The coatings can range from Coating Films, Varnishes, and Paints from either single or multi-coat applications.
The cutter has a 25mm tungsten carbide blade with cutting profile along one edge, a strong Aluminium shaft and comfortable ergonomic plastic grip.
The 11-tooth 1mm cutter gives 100 cuts instead of 25 (as is the case with the standard 1mm cutter).