Hotline: 0984.843.683 Email: info@ttech.vn  Zalo: 0984.843.683

AIR OPERATED DIAPHRAGM PUMP - 1/2" DDP13 Macnaught

Mã sản phẩm: DDP13
Sử dụng cho Model:
Hãng SX: MACNAUGHT
Xuất xứ
Bảo hành
Tình trạng

Tình trạng: Còn hàng

Đặt hàng
The DDP13 offers an economical fluid transfer option where medium to high flow rates are needed with little back-pressure. The ability to dry-run allows easy priming while operating without any damage to the pump. A removable air valve offers repairs to be made while the pump is still fitted in place for quick simple maintenance. Multi-ported inlet and outlet manifolds offer a variety of options when making fluid connections. The all Polypropylene body allows this pump to be used with a range of compatible chemicals as well as the new or used oils and engine coolants (RTU), diesel or oily water applications.

Yêu Cầu Giá Tốt

Thông tin sản phẩm

Technical Specfications


Maximum Air Pressure: 690kPa (100psi)
Inlet / Outlet Ports: 1/2" NPT(F)
Air Inlet Size/Type: 3/8" NPT(F)
Maximum Flow Rate: 42 L/min (viscosity dependant)
Suction Lift: 3.6m (dry) / 9.1m (wet)
Maximum Solids Handling: 1.6mm (0.0625")
Fluid temperature range: 0ºC - 82ºC
Maximum noise level: 86 dB(A)
Fluid Compatability: Oils (new & used), Engine Coolants RTU (new & used), oily water, Diesel
Wetted Components: Polypropylene (body & valve seats), Buna N (diaphragms), Acetal (check valves)


Features & Benefits


Multi-port inlet / outlet manifolds - Allow different options to connect suction and delivery hoses
Up to 42 litre / minutes flow rate - Measured with water at the pump outlet
Removable Air Valve - Easy swap-out for repairs without time costly dismantling / disconnecting
Full Polypropylene body - Wide range of chemical compatability for broader applications
Air-Operated pumps can be speed controlled - More control over a pump output
Removeable exhaust muffler included - Easy replacement or remote fitting to reduce noise output
Fast fluid transfer for low viscosity fluids - Inexpensive way to move large volumes of fluid
Easy self-priming - No damage to pump while running even with little or no fluid flow (for short periods)


Bình luận