Point Level Switches
|
|
|
Gladiator Admittance Switch
|
|
The Gladiator Admittance switch is an all-round point level switch for detecting level of liquid, slurry or powder in a tank or vessel. The unit measures the capacitance or "admittance" between a probe and the wall of the container. Operates in tough industrial environments and has an excellent immunity to product build-up.
More Information
|
|
|
|
G1 Microwave Switch
|
|
The G1 Microwave Switch can be used for blockage detection, barrier detection, machine detection, collision detection for protection, point level measurement, and detection of objects or material between two points.
More Information
|
|
|
|
Rotonivo Rotary Paddle Level Switch
|
|
Depending on the requirements, the Rotonivo® rotary paddle switch is used as a full, demand or empty detector in storage silos or process vessels and is suitable for use in almost all solids. With its simple electromechanical measuring principle it can also be adapted for extreme process conditions.
A motor driven shaft causes the vane to rotate. Once the material level reaches the vane, thereby preventing further rotation, this creates a torque, which is converted via a switch to an electric signal. Once the vane is free again of the material, the output signal is reset and the motor driven shaft rotates again.
This reliable and maintenance-free limit switch for safe level detection in bulk solids has international approvals for use in gas and dust hazardous areas and is also certified to SIL 2.
More Information
|
|
|
|
Vibranivo Vibration Level Limit Switch
|
|
The Vibranivo® is robust, easy to operate and can, via its series range, be precisely configured for each application.
Electronically stimulated piezos cause the fork to vibrate. As soon as the sensor is covered with material, the vibration is dampened and the resulting electrical current change causes the output signal to switch. Once the material level falls below the sensor, it is free to vibrate again and the output signal is reset.
International approvals for use in hazardous locations (gas and dust).
More Information
|
|
|
|
RFnivo Capacitive Limit Switch
|
|
RF3100 Standard Version
Full, Demand, Empty Indicator
Shaft is selectable as
- Rod version (verticaly, horizontaly and oblique installation)
- Cable version (vertical installation)
Both versions are available as remote versions with remote electronics housings available (for example, for use in applications/processes with heavy vibration)
More Information
|
|
|
|
Gladiator Conductivity Switch
|
|
Gladiator Conductivity switches are suitable for most applications that involve a conductive liquid, including food and beverage processing, chemical, oil and gas, paint, paper, pharmaceutical and water/wastewater treatment plants.
More Information
|
|
|
|
Gladiator Vibration Switch
|
|
Gladiator Vibration switches are for a wide range of liquids and solids. This type of switch is suitable for many situations requiring level detection, including pump control, high or low-level alarms, and detection of an interface between two different materials.
More Information
|
|
|
|
Rotation Switch
|
|
The Rotating Switch vane is driven by a slow speed synchronous geared motor. For safe and multi-purpose level monitoring in all types of containers and silos. It can be used with all bulk materials and powders as a point switch.
More Information
|
|
|
|
Gladiator Gen 3 Microwave Switch
|
|
The Gladiator Microwave provides point level switching for presence or absence of most solid and liquid materials. Used in any application where microwave energy is absorbed by the material being monitored, including replacement of traditional contact switching devices.
More Information
|
|
|
|
Gladiator Acoustic Switch
|
|
Non-contact self cleaning blocked chute detection switch. The Gladiator Acoustic Switch uses Acoustic Wave technology in a new Sender/Receiver form for blocked chute detection and anti collision for heavy machinery.
More Information
|
|
|
|
Gladiator Pump Protection Switch
|
|
The Gladiator Pump Protection switch can be used in applications where pipe or wall mounting with minimal protrusion is required. It can also be used to detect the presence of liquids to ensure the pump will never run dry.
More Information
|