| Measuring range |
Dew point: -100 … 0 ºC
Temperature: -30 … + 70 ºC
Pressure: -0.1 … 1.6 MPa |
| Accuracy |
Dew point: 2 ºC (-20 … -100 ºC )
Temperature: 0.3 ºC
Pressure: 0.05 bar |
| Pressure range |
-0.1 … 1.6 MPa |
| Power supply |
12 … 30 VDC / 30 mA |
| Measured gas |
Non-corrosive gases |
| Ambient conditions |
0 … 50 ºC |
Transport
temperature |
-30 … +70 °C |
Response time [90%]
(at 4 l/min, perforated cap) |
-80 …-20 °C: 20 sec
-20 … -80 °C: 3 min |
| Output signal |
4…20 mA, 3-wire (0699 0220, 0699 0221, 0699 0223)
Modbus / RTU (0699 0222, 0699 0224)
Loop powered 4…20 mA (0699 0025) |
| Analog output scaling |
4 mA –> -100 °C
20 mA –> +20 °C |
| Connector |
M12, 5 pole |
| Wire sizes |
Connector terminals support 0.14 … 0.25 mm² |
| Casing |
Process connection: stainless steel
Casing: Zinc alloy |
| Classification |
IP65 |
| Process connection |
G 1/2” thread (ISO 228/1) |
| Sensor protection |
A: stainless steel sinter filter, pore size < 30 um
B: Perforated sensor cap (standard, requires a prefilter 0.1 um) |
| EMC |
According to IEC 61326-1 |