The ER815 is available in the following configurations, depending on your application:
ER815R: includes PowerChrom software, for capillary electrophoresis, microchip electrophoresis and chromatography-type applications.
ER815C: includes Chart software, for flow injection analysis and conductivity monitoring applications.
ER815: for people wishing to use third-party software to record the data. This includes ChemStation from Agilent, 32 Karat from Beckman Coulter and LabVIEW (using the virtual serial interface over USB connection to computer). In this configuration, the ER815 provides both analog and serial data output.
Thông số kỹ thuật
Back panel connectors: BNC (analog voltage), USB (virtual RS232 serial)
Trigger input from a Contact closure or TTL with the supplied EC073 Trigger cable
Power requirements (mains adaptor supplied): 12 V DC, ~10 W
Channels: 1
Input connector: 10 pin LEMO (for C4D) or DIN (for other detectors)
Signal gain: x1, x10, x100
Analog signal resolution: 16 bits (Chart software), 24 bits (PowerChrom software)
Virtual serial port resolution: 24 bit
Input gain ranges: ±20, 50, 100, 200, 500 mV ±1, 2, 5 V
Excitation frequency: 20 — 2000 kHz
Excitation amplitude: 1 — 20 V AC p-p, sinusoidal, @ <50 mA
Offset: ±5.5 V on ±10 V output range
Low pass filters: 1000 (off),10, 1 Hz
Output signals: ±5 V max, or USB with virtual serial interface
Dimensions (h × w × d): 65 × 200 mm × 250mm (2.6 × 7.9 × 9.8”)
Weight: 1.8 kg (4.3 lb) maximum
Operating temperature: 0 to 35 °C
0 to 90% humidity (non-condensing)
>>> ER825 Edaq chính hãng, giá rẻ ở Hà Nội