Hotline: 0984.843.683 Email: info@ttech.vn  Zalo: 0984.843.683

Digital Temp Controller(synchronization) FX3D-Sync Dotech

Mã sản phẩm: FX3D-Sync
Sử dụng cho Model:
Hãng SX: Dotech
Xuất xứ
Bảo hành
Tình trạng

Tình trạng: Còn hàng

Đặt hàng
- Powerful Dual Measurement and Control
- Perfect Syncing according to a Sensored Temperature
- Accurate Temperature Set
- Smart Control(Various Control Modes)
- Precise Temperature Control, sensor calibration, sensor error detection, data backup

Liên Hệ Hỗ Trợ

    • SĐT: 0984 843 683

    • Mail: info@ttech.vn

      • Zalo: 0984.843.683

Thông tin sản phẩm

Powerful Dual Measurement and Control
More precise temperature control according to a set point 
Various sensor applications and perfect sensor calibration 

Smart Control
(Various Control Modes)
Control at operation cycle or ratio when error occurs.
Heating/cooling output, independent timer output, upper limit/lower limit alarm, defrost output 

Simple Setup for User Convenience
Simple or custom setup for user convenience
Parameter limits to prevent erros and artifical intelligent temperature control


Sensor Calibration
Users can calibrate a sensor by adjusting between sensored and actual temperature.


Sensor Error Detection
It detects the sensor errors automatically and alarms immediately.


Automatic Output Cycle after Sensor Error
In terms of risk management, users can configure the automatic output cycle after sensor error.


Auto Save and Restoration of Parameter Values
Parameter values are saved into the nonvolatile memory safely and restored after blackout automatically. 
You can always use with peace of mind.


Minimum On/Off Duration Time
Regardless of conditions, it maintains on or off status during the period set by user.

Analog Signal Output(4-20mA)
FX3D-Sync transmits the analog signal(4-20mA) to other devices or equipments.

Communication via RS485 MODBUS
It is versatile. Communication via RS485 provides many options to the users
(remote control, remote display, data manipulation, and etc.)


■ Technical Specifications

FX3D-Sync-00 FX3D-Sync-A1 FX3D-Sync-R4
Dimensions 78(W) X 35(H) X 78(D)mm
※ Panel Cut-Out Form 71(W) X 29(H)mm
Power 100~240Vac, 50/60Hz
Power Consumption Max. 6VA
Display FND, LED Type(0.1 ℃ Display)
Connection Screw Terminal(Up to 1.5㎟ Wire)
Input/Output Temperature
Sensor Input
2P, Dotech Standard NTC Sensors(DPR-TH01,DPR-TH02)
Relay Output 2P(250Vac/5A)
Sensor Temperature DOTECH Standard NTC sensor DPR-TH01
Type : NTC 5KΩ
Range : -50~105℃
Accuracy : ±0.3℃ at 25℃

DOTECH Standard NTC sensor DPR-TH02(Optional)
Type : NTC 10KΩ
Range : -50~150℃
Accuracy : ±1.5℃ at 25℃
Analog Signal Output
(4-20mA)
- OK -
RS485 Communication
(MODBUS RTU/ASCII)
- - OK
Operation Temperature -10~50℃  / Humidity under 90% RH
Storage Temperature -20~60℃  / Humidity under 90% RH


Bình luận