Product Highlights
Configuration is simple via integral push button display module
Three (3) programmable relays for switch, pump control and fail-safety
Narrow 3” beam width for applications with limited measurement space
Short 8” dead band maximizes the measurable filling capacity of the tank
PVDF transducer and NEMA 4X polycarbonate enclosure for corrosive liquids
Range: 8" to 18.0' (20cm to 5.5m)
Repeatability:
Loop Output: 0.25" (6.35mm)
Isolated, Sinking 12 to 28 VDC
Dead band: 8" (20cm)
Beam width: 3" (7.6cm)
Configuration: Push button
Memory: Non-volatile
Display type: LCD, 6-digit
Display units: Inch, cm, percent, feet or meter
LCD indication: Level and relay status
Supply voltage: 95-250 VAC
Power: 20 watts @ 120 VAC
Contact type: Relay 1, SPDT , Relay 2 & 3 SPST NO All Commons Connected Together
Contact rating: 2A, 30 VDC 60W(DC), 125 VA, 220 VDC, 250 VAC
Contact fail-safe: Programmable
Process temp.: F: -4° to 140° /C: -20° to 60°
Temp. comp.: Automatic
Ambient temp.: F: -40° to 140°/C: -40° to 60°
Pressure: MWP = 30 PSI (2 bar)
Enclosure rating: NEMA 4X (IP65)
Encl. material: Polycarbonate
Encl. hardware: Brass & stainless
Enclosure vent: Water tight membrane
Trans. material: PVDF
Conduit entrance: Dual, 1/2" NPT
Process mount: 2" NPT (2" G)
Mount gasket: Viton®
Classification: General purpose
Compliance: CE, RoHS