| Items |
ESS-S3011 specifications |
| Polarity |
Positive or negative |
| Output voltage |
0.2 to 30.0kV +/-5% (30.5kV Maximum)
0.2 to 10kV: 0.05V step, 10.0 to 30.0kV: 0.1kV step
|
| Repetition cycle |
0.05s to 99.9s +/-10% / Manual
0.05s to 10.0s: 0.05s step, 10.0 to 99.9s: 0.10s step
|
| No. of time of discharge |
1 to 60,000 times /continuous |
| Discharge mode |
Contac discharge / Air discharge |
| Radiation level mode |
Normal mode / Extra mode |
| Trigger mode |
Gun trigger / Main unit trigger / External trigger |
| Operation panel |
Color LCD / Push-buttons (Partially lighting) |
| Gun holder |
Standard attached (to hold the discharge gun Model GT-30R) |
| Radiation mode select switch |
Extra / Normal switching function built-in |
| Discharge detection |
Discharge detection function in air-discharge mode equipped |
| Pre-checking function |
Following 3 steps function equipped (by under operation. Not the calibration but just checking)
SETP1 High voltage output checking
STEP2 Withstanding voltage checking
STEP3 Discharge relay operation checking |
| CR & Gun head checking |
CR constant and gun head recognizable (with an indicator to prevent the wrong combination) |
| IEC standard test mode |
Contact discharge mode: 2.0, 4.0, 6.0, 8.0 kV step
Air discharge mode: 2.0, 4.0, 8.0, 15.0 kV step
|
| Manual test mode |
Contact/Air discharge mode: 0.20kV to 30.0kV
Sweep function available
Up to 50 units (test settings) storable
|
|
Sequence test mode
|
Seamless run of the selected test sequence
No. of steps per one sequence: up to 22 steps
No. of test sequences: up to 20
|
| Warning lamp |
Lights up while the HV circuitry is on.
Blinks while discharges are in progress.
|
| Charging capacitor and resistance |
150pF +/-10%, 330 ohm+/-10% (built into Discharge Gun GT-30R) |
| Main unit charging resistance |
10M ohm (53M ohm for combination with Discharge Gun GT-30R) |
| AUX connector |
D-SUB 15 pin, female connector
Connection of Warning Lamp (optional)
Connection of Automatic ESD Eliminator (optional)
External interlock input
External trigger input
|
| Optical communication connector |
Optic connector for PC communication (serial interface) |
| Power supply/ Power consumption |
100V to 240V AC, 50Hz/60Hz +/-10% 75VA |
| Included accessories |
Remote controller 13-00004A, Gun holder, Instruction manual
|
| Dimensions and weight |
(W) 270 X (H)312 X (D)295 mm
Approx. 7.0kg (gun holder excluded) , Approx. 7.5kg (gun holder included)
|