Hotline: 0984.843.683 Email: info@ttech.vn  Zalo: 0984.843.683

Gas Detector Q45S Wet H2S Analytical Technonogy

Mã sản phẩm: Q45S Wet H2S
Sử dụng cho Model:
Hãng SX: Analytical Technonogy
Xuất xứ
Bảo hành
Tình trạng

Tình trạng: Còn hàng

Đặt hàng
Gas Detector
Model: Q45S Wet H2S
Hãng: Analytical Technonogy

Liên Hệ Hỗ Trợ

    • SĐT: 0984 843 683

    • Mail: info@ttech.vn

      • Zalo: 0984.843.683

Thông tin sản phẩm

The Q45S model is an odor monitoring system that uses our standard Q45 electronics package in conjunction with a special Wet H2S sensor. Measurements may be either at the inlet to scrubber systems where gas concentrations can run as high as 200 PPM or at the outlet, where gas concentrations are ideally down below 0.5 PPM. Special gas sensor configurations are available for either duct insertion or flowcell use.

Odor control in wastewater treatment plants and sewage collection systems often requires the use of scrubber systems. Many of these scrubbers employ a wet process using a hypochlorite solution to remove hydrogen sulfide (H2S) from air streams prior to discharge. Monitoring the hydrogen sulfide in both inlet and discharge air has presented problems for standard sulfide gas sensors. ATI's Q45S Wet H2S Gas Detector is a new type of gas sensor technology that allows continuous monitoring in this type of application, where condensing humidity conditions are normal.
 
Because Q45S Wet H2S Gas Detector systems are often monitoring gas streams with condensing levels of water vapor, provision has been made for eliminating water droplets from the gas sensor that could present a barrier to the diffusion of hydrogen sulfide into the sensor. An optional air-purge system controlled by the gas transmitter will periodically deliver a blast of air across the critical sensor surfaces to remove water droplets. This system insures a clear gas diffusion path to the sensor and reliable measurements on a continuous basis.


Click xem ngay >>> Gas Transmitter B12 2-Wire Analytical Technonogy

Bình luận