Results in faster loop control and savings in process materials.
Allows use in systems where operating gas is expensive.
Meet most process and machine requirements.
Provides stable operation over wide temperature Range.
Permits use in space restricted areas.
Maintains set points under adverse vibration conditions.
Allows installation flexibility for most applications.
Suitable for outdoor and indoor installations.
Rotork Fairchild's T5200 Transducer is a Fast Response I/P, E/P Transducer controlled by a 4-20 mA current in a control loop. With its reliable signal conversion and pneumatic circuit sections, the T5200 I/P Transducer provides fast response to input signal changes, resulting in faster loop control and savings in process materials. The Signal Conversion Section (PC Board) accepts a 4-20 mA current from the control loop. This signal current is applied to a coil which creates a magnetic force that moves a Flexure Arm. The Pneumatic Section operates as a force balance system. A Sapphire Ball floats inside a Nozzle and controls the output pressure by exhausting air supplied through an Orifice. This Sapphire Ball acts as a piston exerting a force which is balanced against the force of the Flexure Arm.Its minimal air consumption allows you to use the T5200 in systems where operating gas is expensive. Five available input signal ranges deliver the versatility to meet most process and machine requirements. These available inputs are 1-5 mA, 4-20 mA, 10-50 mA, 1-5 VDC and 1-9 VDC, each with the corresponding output range of 3-15 psig, [0.2-1.0 BAR], (20-100 kPa).