The LubCos H2O measures the relative humidity of the oil and thus directly displays the saturation degree in the water:
› 0 %: Absolutely dry oil.
› 100 %: The oil is completely saturated with water.
Additional water will not be dissolved anymore and will present itself as free water. In contrast to the humidity analysis from laboratories, where the absolute water content is defi ned in ppm (parts per million), the
saturation limit of the oil can be determined by relative humidity measurement. The advantage of the relative humidity over the absolute water content is, that it is not necessary to know the oil or its saturation limit in order to determine if there is free or dissolved water.
Example:
› Mineral oils (e.g. HLP) have a comparatively low water absorption capacity. 500 ppm may signify that the oil is over-saturated and that free water exists.
› Ester oils (e.g. HEES) have a relatively high water capacity.
500 ppm may show that the oil is just saturated by 15 %. Please also note the characteristics of the relative humidity with different temperatures: Warm oil can dissolve more water than cold oil. Therefore, the relative humidity of the oil increases in case of no further water supply. Hot, relatively dry oil, may suddenly keep free water if the ambient temperature cools down.
The LubCos H2O points out the current saturation of the oil with water, independent from oil type and temperature and addi tionally assures operation of systems by direct warning.