Máy cắt siêu âm Honda ZO-91
When ultrasonic vibration is applied to a blade, the friction between the blade and the workpiece is reduced. As a result, less physical force needs to be applied to the cutter or knife when cutting the workpiece normally.
*If the blade is not capable of cutting the material by itself (without ultrasonic vibration), it will not be able to cut the material when ultrasonic vibration is applied.
<< note >>
* It does not reinforce the hardness of blades. The blade cannot cut the material that is harder than itself.
* Ultrasonic horn and ceramics heats up by long time use (about 10 minutes).
Protection circuit will stop the operation. Please rest the unit until it cools down.
* Pressure force to the blade is up to 3 kg. Too much pressure cause dislocation of blade, overheat or malfunction.
* Thermo protection may work shorter time.
When the unit stops operation with too much heat, please wait until it cools down.
* Please wear protection goggles, safety gloves for your safety while in use or replacing blades.
* Please be aware for the harmful fume generated from the material during the operation.
Please have good ventilation for such cases. |
Features
- Unique "TAF" circuit keeps the output power stable and powerful.
- Not likely other models, no need to keep holding down the operation switch on the handpiece switch (turns off automatically after 10 minutes operation).
- High speed vibration, 40,000 cycle per second (40 kHz) assists smooth cutting with less pressure force.
- Able to select Normal mode or High mode.
- Main unit has handpiece holder. Handpiece settles safe while not in use.
|