Hotline: 0984.843.683 Email: info@ttech.vn  Zalo: 0984.843.683

Máy đo độ cứng siêu âm UCI NewSonic SonoDur3

Mã sản phẩm:
Sử dụng cho Model:
Hãng SX:
Xuất xứ
Bảo hành
Tình trạng

Tình trạng: Còn hàng

Đặt hàng

Máy đo độ cứng siêu âm UCI NewSonic SonoDur3

Yêu Cầu Giá Tốt

Thông tin sản phẩm

Máy đo độ cứng siêu âm UCI NewSonic SonoDur3


Measuring principle

UCI Method, corresponds to DIN 50159, ASTM A1038

Test indenter

Vickers diamond 136°

Test loads
Newton scale (1kgf = 9.81 N)

Motor probes: 1N (0.1 kgf), 3N (0.3kgf) and 8.6 N (0.9 kgf) Handheld Probes: 10N (1 kgf), 30N (3kgf), 49N (5kgf), 98N (10kgf), (Other test loads on request)

Hardness scales and range
(according to relevant standards), in this case table A1 respectively T1, T2 (low alloy steel). Different measuring ranges are valid for other materials. When exceeding the limits the conversion range will be extended. The calculated values are highlighted in red besides the original data in HV.

Note:
Conversions are acc. to latest ASTM E140-12bԐ1 (2013) and EN ISO 18265:2014.
Conversions into tensile strength: 98N (10kgf) test load only.

Vickers HV 10 – 1999 (9999)
Brinell HB 76 – 618
Rockwell HRB 41 – 105
Rockwell HRC 20,3 – 68
Rockwell HRE 70 – 108,5
Rockwell HRF 82,6 – 115,1
Rockwell HRA 60,7 – 85,6
Rockwell HRD 40,3 - 76,9 (EN ISO 18265 only)
Rockwell HR45N 19,9 – 75,4
Knoop HK 87 – 920 (ASTM E140 only)
Shore HS 34,2 – 97,3 (nur ASTM E140)
Zugfestigkeit MPa 255 – 2180 (EN ISO 18265 only)

Measurement uncertainty*

< 4 % (HV5, HV 10). For other test loads and ranges see table below.

Relative repeatability*

< 5 % (HV5, HV 10). For other test loads and ranges see table below.


Bình luận