| Measurement Geometry |
45°/0° - or d/8° for UK Versionen - according to DIN 5033
Optional 45°/0° AND d/8° with MA35-UK Adapter (Scanning area - 3 mm or 6 mm) |
| Illuminants |
D65, D55, D50, A, C, F11 |
| Standard Observer |
2° and 10° |
| Colour Scales |
XYZ, Yxy, ?E CIE L*a*b*,
L* u* v*, L*C*h, Hunter Lab |
| Quality Control Tolerance Limits and Colour Differences |
?E CIELab; ?L, ?a, ?b;
?L, ?u, ?v; ?L, ?C, ?h;
Min/Max, PASS/FAIL |
| Spectral Light Source Measurement |
Spectra and chromaticity measurement of light sources such as LED's - Optional |
| Displayed Spectral Range |
400 nm to 700 nm |
| Spectral Resolution |
Holografic grating-Spectrometer
HWB*** @ 500 nm < 10 nm
Scanning in 3,5 nm steps
115 x 16-Bit values per scan |
| Display |
High resolution O-LED colour display:
High contrast and low-power
1/4-VGA, 320 x 240 Pixel |
| Repeatability |
< 0,05 ?E CIELab |
| Light Source |
white and blue LED's
Lifespan > 20 years |
| Scanning Time |
Complete measurement cycle with calculation and readout time: 0.5 sec |
| Multiple Scanning |
Mean calculation of 1 to 20 individual measurements with colour values and standard deviation statistics displayed |
| Power Supply |
Rechargable battery NiMH 6-Volt /1100 mAh
Operating time > 15 hours
Charging time 1.5 hours
Optional - operation with power supply |
| Automatic Accessory Recognition |
An accessory is detected and device settings automatically modfied accordingly |
| Calibration |
With white standard certified by the Federal Institute for Materials Research (Bundesanstalt for Materialforschung -BAM), Optional - 2-stage calibration with working standard |
| User-Mode |
Limited user rights - Password protected |
| Upload Standards from PC |
Yes |
| Memory |
Memory for 1000 standard colours
Memory for 1000 colour values
Memory for 300 spektra (400-700nm / 3.5nm) |
| Standard Colour Management |
Standards loaded by list with Best-Match tool
Standards loaded by index-no.
Standards loaded by entering name |
| PC-Interface |
USB 2.0
Bluetooth© - Optional
RS232 - Optional |
| Accessories |
For the measurement of inhomogeneous samples, transparent, translucent and opaque liquids, powders in cuvettes or tablet form.
Holder/stand with power supply:110-240V, 50/60 Hz |
| Dimensions |
Device with battery: 180mm x 82mm x 40mm - 370g
Probe head 45°/0°: 60mm x 25mm Ø - 170g
Probe head d/0°: 78 mm x 56 mm Ø - 250g |
| Climatic Conditions |
Ambient temperature: 15°C to 45°C
Relative humidity: max. 85% non-condensing |