Hotline: 0984.843.683 Email: info@ttech.vn  Zalo: 0984.843.683

Máy in 3D Fortus 380mc and Fortus 450mc Stratasys

Mã sản phẩm: Fortus 380mc and Fortus 450mc
Sử dụng cho Model:
Hãng SX: Stratasys
Xuất xứ
Bảo hành
Tình trạng

Tình trạng: Còn hàng

Đặt hàng
Máy in 3D
Model: Fortus 380mc and Fortus 450mc
Hãng: Stratasys


Yêu Cầu Giá Tốt

Zalo/tell: 0984.843.683; Email: hien@ttech.vn

Thông tin sản phẩm

Flexibility and control
Embed hardware or circuitry, fine-tune part performance, optimize build speed or achieve a smoother finish. Custom tool paths and other advanced features of Insight software give you ultimate control over your build parameters.


Speed and efficiency
Produce complex, high-requirement parts faster than ever. Plus, get up to two weeks of unattended build time with high-capacity material options available on the 450mc.


No special facility requirements
Install Fortus Systems virtually anywhere.  No special venting is required because Fortus systems produce no noxious fumes, chemicals or waste with most materials.


Thông số kỹ thuật


Layer thicknesses:
0.330 mm (0.013 in.)
0.254 mm (0.010 in.)
0.178 mm (0.007 in.)
0.127 mm (0.005 in.)


Support structure:
Soluble for most materials; break-away for PC-ISO and ULTEM; soluble or break-away for PC


System size/weight:
129.5 x 90.2 x 198.4 cm (51 x 35.5 x 78.1 in.)/with crate: 680 kg (1,500 lbs.), without crate: 601 kg (1,325 lbs.)
Build envelope options:
Fortus 380mc: 355 x 305 x 305 mm (14 x 12 x 12 in.)
Fortus 450mc: 406 x 355 x 406 mm (16 x 14 x 16 in.)


Material delivery options:
Fortus 380mc: One bay each for material and support canisters
Fortus 450mc: Two bays each for material and support canisters


For maximum material capacity on the Fortus 450mc, Xtend 500 Fortus Plus material boxes are available for ABS-M30 (ivory and black), PC (polycarbonate) and their support materials. Each box contains 500 cubic inches (8194 cubic centimeters) of thermoplastic, so the 450mc can run nonstop for over two weeks without changing material.


Achievable accuracy:
Parts are produced within an accuracy of ± .127 mm (± .005 in.) or ± .0015 mm/mm (± .0015 in/in), whichever is greater. (Accuracy is geometry dependent. Achievable accuracy specification derived from statistical data at 95% dimensional yield.)


>>> Fortus 900mc chính hãng

Bình luận