Máy thử kéo nén lò xo
Model : ASP-1/ASP-1S
Hãng sản xuất : Digitech
ASP specification
| Specification / Model |
ASP-1/ASP-1S |
ASP-5/ASP-5S |
| Capacity |
10N（1kgf） |
50N（5kgf） |
| Load resolution |
0.1mN（0.01gf） |
1mN（0.1gf） |
| Length resorution |
0.01mm |
0.01mm |
| Test speed |
1～600mm/min |
1～600mm/min |
| Max test length |
210mm |
210mm |
| Anvil diameter |
20Φ |
60Φ |
| Testing machine standard |
JIS B 7738"Verification of the coil spring compression and tensile testing machine" class 0.5 compatible |
| Transportation |
Precise ball screw / servo motor |
| Safety measures |
Mechanical limit stop / Over load stop / emergency stop SW |
| Communication method |
USB1.1 |
USB1.1 |
| Dimension |
W450×H570×D350 |
W450×H570×D350 |
| Weight |
approx.45kg |
approx.45kg |
| Power source |
AC100 or 220V |
AC100 or 220V |
| Specification / Model |
ASP-10/ASP-10S |
ASP-50/ASP-50S |
| Capacity |
100N（10kgf） |
500N（500kgf） |
| Load resolution |
1mN（0.1gf） |
10mN（1gf） |
| Length resorution |
0.01mm |
0.01mm |
| Test speed |
1～600mm/min |
1～600mm/min |
| Max test length |
210mm |
210mm |
| Anvil diameter |
60Φ |
60Φ |
| Testing machine standard |
JIS B 7738"Verification of the coil spring compression and tensile testing machine" class 0.5 compatible |
| Transportation |
Precise ball screw / servo motor |
| Safety measures |
Mechanical limit stop / Over load stop / emergency stop SW |
| Communication method |
USB1.1 |
USB1.1 |
| Dimension |
W450×H570×D350 |
W450×H570×D350 |
| Weight |
approx.45kg |
approx.45kg |
| Power source |
AC100 or 220V |
AC100 or 220V |
※Specifications are subject to change without notice.
ASP CHARACTERISTIC.
- To load measurement of the compression spring, tension spring, the disc springs are supported.
- It is possible to measure point setting of up to five stages.
- It is possible to measure the set point load, free height, the initial tension, adhesion height and maximum value.
- High-speed printing printer in c built-in measurement result it is possible to be printed instantly.
- You can the average value measured by the length setting measurement and deflection setting measurement and round trip measurement.
- Calls once set measurement conditions are also at the scene to measure the spring of multi-breed can be part number registration can be done immediately test.
- Aggregate functions can be standard value setting also provides so such as pass-fail number of articles and process capability index, you can grasp at a glance.
- Four languages of Japanese, English, Chinese, Korean is switched at any time it can be used.
- You can length measurement and deflection measurement by the load setting (standard on S models)
- During one of the test in the complex measurement mode equipped for composite test of displacement measurement and load measurement. (Standard on S models)
【Corresponds to the deflection test the length test】
Equipped with two of the functions of the length settings and the amount of deflection setting. In addition, in the compression test is possible to measure the height and load value at the time of contact of the spring.
【Corresponding to a complex test of load and displacement】
The displacement settings and load setting and complex in any order can be set and measurement of up to 5 points. (S model)
【Option】
Also jewels Hall with compression board for the measurement of the spring can not be self-supporting.
|