Hotline: 0984.843.683 Email: info@ttech.vn  Zalo: 0984.843.683

Online Particle Detector - Robust icountPDR Parker

Mã sản phẩm: icountPDR
Sử dụng cho Model:
Hãng SX: Parker
Xuất xứ
Bảo hành
Tình trạng

Tình trạng: Còn hàng

Đặt hàng
The icountPDR Robust Particle Detector from Parker represents the most up to date technology in particle detection. The design dynamics, attention to detail and moulding compatchness of the permanently mounted, on-line particle detector module, combined with on-board, laser based, leading-edge technology, brings to all industries a truly revolutionary, particle detector as a remarkable cost effective market solution to fluid management and contamination control.


Liên Hệ Hỗ Trợ

    • SĐT: 0984 843 683

    • Mail: info@ttech.vn

      • Zalo: 0984.843.683

Thông tin sản phẩm

Features


Independent monitoring of system contamination trends.
Rugged design ensures protection against environmental exposure.
Small and compact device constructed in SS.
Moisture %RH indicator (optional).
Cost effective solution to prolong fluid life and reduce machine downtime.
Continuous performance for prolonged analysis.Fuel, Hydraulic and phosphate Ester fluid compatible construction.
Self diagnostic software.
Full PC/PLC integration technology such as:- RS232 and 0-5Volt, 4-20mA, CAN(J1939) (Contact Parker for other options).
Set up and Data logging support software included.


Specifications
Product start-up time 5 seconds minimum
Measurement period 5–180 seconds
Reporting interval 0–3600 seconds via RS232 communication
Principle of operation Laser Diode optical detection of actual particulates
International codes ISO 7 – 22, NAS 0 – 12
Calibration By recognised online methods confirmed by the relevant ISO procedures: MTD – via a certified primary ISO 11171 automatic particle detector using ISO 11943 principles, with particle distribution reporting to ISO 4406:1996
Recalibration Contact Parker Hannifin
Working pressure 2–420 bar (30–6000 PSI)
Flow range through icountPDR Note : Flow may be bi-directional 40–140 ml/min (optimum flow 60 ml/min) (0.01 – 0.04 USGPM (optimum flow 0.016 USGPM))
Online flow range via System 20 sensors Size 0 = 6 to 25 l/min (2–7 USGPM) Size 1 = 24 to 100 l/min (6–26 USGPM) Size 2 = 170 to 380 l/min (45–100 USGPM)
Ambient storage temperature –40°C to +80°C (–40°F to +176°F)
Environment operating temperature -30°C to +60°C (–22°F to 140°F)
Fluid operating temperature +5°C to +80°C (+41°F to 176°F)
Computer compatibility Parker recommends the use of a 9-way D-type connector. This can be connected to a USB port using a USB-serial adaptor. Note that these connectors/adaptors are NOT supplied with icountPDR units: contact Parker Hannifin for advice.
Moisture sensor calibration ±5% RH (over compensated temperature range of +10ºC to +80ºC; +50ºF to +176ºF)
Operating humidity range 5% RH to 100% RH
Moisture sensor stability ±0.2% RH typical at 50% RH in one year
Power requirement Regulated 9–40Vdc
Current rating Typically 120mA
Certification IP69K rating
Analogue output options (specified when ordering)
Variable current 4–20mA
Variable voltage 0–5Vdc, 0–3Vdc (user selectable)
CAN-bus to SAE J1939 (e.g. Parker IQAN)
Moisture sensor Linear scale within the range 5% RH to 100% RH


Bình luận