- USB Port for Quick & Easy Setup: Simply connect the PS3037 to a PC, then use ViewPoint software to configure CT type, communication protocol, and other parameters.
- Optional Display: The scrolling display can be used for quickly reading real-time values and performing diagnostics during setup. Without even connecting to a laptop, know that the meter is configured properly before leaving the job site.
- Serial & Ethernet on the Same Unit. No longer be limited to choosing either Serial or Ethernet. All Ethernet units (PS3037-E-X) are equipped with both RS-485 and RJ-45 connections standard. Having both communication methods ensures maximum flexibility in the field.
- DIN Rail Mounting: The PS3037 is compact enough to facilitate in-panel mounting. Use the angled mounting tabs to install flush on the side or back of the panel wall. Or, use the built-in DIN rail channel for quick and easy mounting near the circuit panel.
- No Integral Voltage Leads: Voltage leads are now user-supplied. Because of this, there is no distinction between "US" and "INTERNATIONAL" PowerScout 3037 instruments. All configurations of the PS3037 can be used throughout the world (50/60Hz)
- Lower Price: Just need Serial communications without a Display? Save 20% compared to the previous-generation PowerScout 3 Plus. PS3037s with Display and Ethernet (PS3037-E-D) are the same price as the previous PowerScout 3.
- Revenue-Grade Performance: ANSI C12.20-2010 qualified Class 0.2
- Over 50 measured parameters for energy measurement, monitoring and diagnostics. Monitors voltage, current, power, energy, and many other electrical parameters on single and three-phase systems.
- Single or 3-phase energy and power meter for submetering applications
- Choose from a full range of Split-Core or RoCoil™ Rogowski-style current transformers
- Patented PhaseChek™ LED indicators ensure correct CT orientation during installation
- Line-Powered: No external power, beyond the service under measurement, is required
- Equipped with industry-standard Modbus and BACnet Communications
- Standard Pulse Output: Send kWh or other pulses to an external device
- Data updates occur every 0.5 second
- ViewPoint Setup Utility software: Verify meter installation, switch between communication protocols, and check real-time values before leaving the job site. ViewPoint 4.0 or later required for the PowerScout 3037.