On-board DC-DC converters and custom components allow the GX1222 to amplify signals to levels far above standard PXI voltage rails. The GX1222 can amplify input signals to an output of 40 VPP into a high impedance load, or 20 VPP into a 50 ohm load.
The GX1222 can be configured with floating input and output connections allowing the amplifier to float up to 250 VDC above ground. The only limiting factor is that both the input and output grounds must connect to the same potential. This capability is very beneficial in applications where the amplifying device should reside at the same ground potential as its source. The floating capability can be added or removed using a simple, user-accessible jumper connection.
Thông số kỹ thuật
| GENERAL |
| Physical Size |
Single-slot, 3U high PXI module |
| Power Requirements |
7.2 W (max) |
| Current Consumption |
+5 V, 3.5 A (max) |
| Signal Ground |
Floated to the same level as the source,
250 VDC + Peak AC (max) |
| EMC Certification |
CE marked |
| Reliability |
MTBF per MIL-HDBK-217E, 25 °C, Ground Benign |
| Safety |
Designed to meet IEC 1010-1, UL 3111-1, CSA 22.2 #1010 |
>>> Gia ban GX1649 Series
|