Voltage rails A through C are used as voltage sources which can be connected to a precision digital to analog converter (DAC) or to an external reference input. Rail A can be connected to DAC A or to external reference A. Rail B can be connected to DAC B or to external reference B. Rail C can be connected to DAC C, external reference C, or to ground. This architecture provides for maximum flexibility. If additional output channels are required, an external switch matrix (such as the GX6616) can be used. An on board EEPROM contains the DAC’s calibration parameters and provides for enhanced accuracy.
Thông số kỹ thuật
| Number of Output Channels |
8 |
| Number of Voltage Rails |
3 |
| Number of DACs |
3 |
| Output Voltage Ranges |
-10 V to +32 VDC (all rails)
-20 V to +20 VDC (all rails) |
| Resolution |
14-bit |
Accuracy @
1 kOhm Load |
±14 mV |
| Slew Rate |
6 V/µs |
| Maximum Load (Minimum Resistance) |
50 Ω |
| Output Noise |
< 4 mV rms, 1 KΩ load, 20 Hz - 300 KHz measurement BW |
| Output Protection |
Short Circuit (Ground) |
| Power ON State |
All Channels / Rails open |
| MAXIMUM CURRENT * |
| Per Channel |
500 mA |
| Per Rail |
500 mA |
| Per GX1838 |
500 mA |
| PXI POWER REQUIREMENTS |
| +5 V |
2.9 A, max |
| +3.3 V |
2.1 A max |
| +12 V |
0.55 A, max |
| -12 V |
0.55 A, max |
|