Hotline: 0984.843.683 Email: info@ttech.vn  Zalo: 0984.843.683

Quick Polisher Nakayama

Mã sản phẩm:
Sử dụng cho Model:
Hãng SX: Nakayama
Xuất xứ
Bảo hành
Tình trạng

Tình trạng: Còn hàng

Đặt hàng
Automatic cutting and automatic polishing of spheroidal graphite cast iron test piece and spherical image automatic analyzer

Yêu Cầu Giá Tốt

Thông tin sản phẩm

Specifications [Model: NAP - 02]


size W1400 × D600 × H1420 cm * Containing projections not included
weight 530 kg
Measure compliance Image analysis by JIS method or NIK method
Time required All steps within 6 minutes (however, depending on set value)
Noise control The noise generating part is housed in the equipment and is 85 db or less
Safety measure Top cover, receiving part cover, full stop function when opened
Dust collector Installation location: In-cabinet built-in type
Supply power supply AC three phase 200V / 220V 50 / 60Hz
Power source used Power circuit AC three phase 200V / 220V 50 / 60Hz 
AC single phase 100V 50 / 60Hz
Operation circuit AC single phase 100 V 50/60 Hz
Air pressure solenoid valve circuit DC 24V
Power capacity 6 kVA (30 A)
Air pressure used 0.5 [Mpa] (Min. 0.4 [Mpa]) * Dry & Clean Air
Flow rate 75 [L / min] or more
Paint color 5 GY 8.5 / 0.5

Cutting part

Cutting step 1 step
Cutting method Dry foil polishing
Cutting wheel Φ 200 mm
Detachment method One-touch attachment and detachment with center cap (except cutting)

Polishing section

Polishing step
  1. Rough finish
  2. Medium finish
  3. Fine finish
  4. Finish
  5. Wiping off
Polishing method Dry foil polishing
Abrasive Wheel Φ 200 mm (first process), other φ 100 mm
Detachment method One-touch attachment and detachment with center cap (except cutting)

Bình luận