Máy đo điện trở bề mặt SIMCO ST-4
Measurement range 10 3～ 10 13 (omega / □ or Ω)
Measurement mode ① standard measurement mode
(Ohm Per Square, Surface Resistivity)
② mat surface - Matt ground terminal between the resistance measurement mode
(Ohms, Resistivity to Ground)
the supplied code use
resistance measurement mode of ③IEC standard
electrode of the IEC standard (contact area and weight method of measuring in the manner of)
LCD Display Index display (display up to one decimal place)
display of the countdown of measurement time by the bar graph
battery level indicator
LED Display ①TEST
green LED lights: standard measurement mode display
(Ohm per square, Surface Resistivity)
red LED lights up: Matt - between the ground terminal resistance measurement mode
(Ohms, Resistivity to Ground)
and display of resistance measurement mode of the IEC standard
② measured voltage display ( 10V, 100V)
green LED lights: 10V output
red LED lights: 100V output
yellow LED lights: the end of measurement
③CHARGE
red LED lights up: during the battery charge display
Measurement time 15s, 30s, 60s
Range setting Can range setting of upper and lower limit with respect to the measurement value
(0.5 square every possible setting)
Measurement accuracy Index display value ± 0.5 (index) (for example; 10 8.5 0.5 )
Measured voltage Automatically the voltage switching
sixth power from ①3 power: 10V, 10MA Max
②6 square from 13 square: 100V, 1mA max
Power supply Method due to its built-in battery
External connection terminal ① external electrode connector
②AC adapter connector (battery charging) {USB mini type}
Measurement area 50mm (electrode length) × 50mm (electrode spacing) (at the time of surface resistance measurement)
Electrode material Special conductive rubber (volume resistivity 0.02Ω · cm MAX.)
Measurement environment 15 ℃ ~ 25 ℃, less than 60% RH
Body dimensions 114 (W) × 78 (D) × 69 (H) MAX. (Mm)
Case Material Stainless
weight Body about 700g accessories code about 25g
IEC measuring electrode
Dimensions φ 6.35 mm ± 0.5 mm × 112.7 mm (H)
Electrode material stainless
Electrode weight 2.5 kg ± 0.25 kg
IEC standard It conforms to IEC 61340-2-3
Connection station
Dimensions 100 mm × 70 mm × 29.2 mm
Material Electrode part: Stainless steel
insulation: Teflon, nylon 66
External connection terminal Banana jack for ①IEC measuring electrode connection
②M4 screw holes
Accessory code
Cable insulation material silicon
Công ty CP Công Nghệ Đỉnh Cao
Trụ sở: Số 12 Chân Cầm, Hàng Trống, Hoàn Kiếm, Hà nội
VPGD: Phòng E2, Tòa nhà C4, Đường Đỗ Nhuận, Xuân Đỉnh, Từ Liêm, Hà nội
Tel: +84 (4) 22428148; Cel: 0984843683,Fax: +84 (4) 37505143
VPGD: Tầng 19, Tòa nhà Indochina/ Số 4, Nguyễn Đình Chiểu, P.Đakao, Q.1,
TP Hồ Chí Minh..
Tel: 08.6685 8911 Fax: 08.6284 0993.
Website: www.ttech.vn, www.store.ttech.vn, www.tshops.vn, www.stock.ttech.vn, http://www.omega-air.vn/