The testing station consists of a testing cage made from aluminium profiles. The front section is fitted with a safety light shield. This guarantees very quick operating processes.
The stator package is fixed via a horizontal drill hole into a small prism. When the area of the safety light barrier is clear the testing process can be started by using the start button. Then a u-shaped bracket with 23 windings moves into the stator and makes contact with the opposite side. The measurement is started with a start signal.
If the measuring result is positive (the stator corresponds to the norm) the u-shaped bracket recedes and the measuring sample can be removed. If the result is negative (the stator does not meet the norm) the u-shaped bracket remains closed – a lamp lights up – and can only be released by activating a switch manually.
Thông số kỹ thuật
| Technical data: |
Stator Tester ST 510 |
| Selectable measuring frequencies: |
12 Hz – 100 Hz (in 0.1 Hz steps) |
| Selectable field strength: |
10 A/m – 10.000 A/m |
| Induction: |
100 mT – 2 T |
| Repeatiability: |
better 1 % ( ± 1digit) |
| Comparability of measuring results: |
according to IEC 60404-3 |
| Maximum current: |
± 105 A |
| Maximum voltage: |
± 32 V |
| Coil connectors: |
3 |
| Operating mode: |
PC | software |
| Power supply: |
105 – 125 V AC or 220 V AC, 50/60 Hz, 0.6 kVA |