- Measures down to –20 °C dew point
- Plug & Play
- Compressed air supply through 6 mm quick-connector
- Power supply: 100 … 240 VAC
- Wall or panel mountable
- Accuracy: 1 … 2 °C
- IP65 casing provides robust protection in rough industrial environment
- 4 … 20 mA output to PLC or SCADA system
- Pre– and Main-Alarm programmable: Optical (red blinking display), 2 relay outputs
Refrigeration dryers are among the dryers in compressed air treatment most commonly used. If the required drying is not achieved, the impact of wet air can be serious: Rust in the pipes, failures of machines , and a negative impact on product quality. SUTO oers with the S 305 a measuring device for dew point monitoring that kicks in alarm indications when drying values are not within the desired range.
The All-In-One dew point monitor serves as a measuring and display device. The connection to the compressed air network is via a 6 mm quick-connector and corresponding connecting hose. The entire measuring unit is integrated together with the display in a rugged housing (IP 65) and is available both as a panel variant or as a wall-mounted housing. Two alarm levels can be programmed (pre and main alarm), serving an optical indications or separate relay outputs. The dew point meter allows a simple and inexpensive dew point monitoring.