- Wafer-Cone differential pressure flowmeter and one from a variety of differential pressure transmitters are integrated into one flowmeter. It can measure mass flow rate of liquids, gases with pressure and temperature compensation, and saturated steam. It also serves in the hazardous area of chemical plants. You can make use of existing transmitters by combining them to the models without transmitters.
- Simple installation : Wafer connection makes installation simple. Flowmeter body flanges are designed to match the pipe flanges by guiding the flowmeter in the center line by fastening bolts.
- Short straight runs : The required straight runs are less than 1/5 of those required for orifice and vortex flowmeters. The narrow installation space allows simple and flexible piping arrangement plan. It leads to space and cost saving.
- Low pressure loss : A proper selection of ß ratio allows lower pressure loss than orifice plate with the same flow rate. It improves energy efficiency of the plant.
- Wide Rangeability : Since the differential pressure created by the meter is stable at low flow rate, it can measure the flow rate with the turn down ratio 14:1 covering guaranteed accuracy. This flowmeter is best suited for the measurement of saturated steam line for air conditioning system whose flow rate is fluctuated at every change-over of cooling and heating and other process lines with flow fluctuation.
- Wear and adhesion resistant : V shape cone has a durable structure against wear or adhesion. It can measures challenging slurry or flue-gas process lines that ordinary orifice could not deal with.
- No impulse piping work required : Direct mounting of a compact differential transmitter requires no impulse piping to save installation cost.
- 3- way stopcock installed : By operating its handle a newly developed 3-way stopcock can switch isolation, equalizing or measuring mode. This stopcock prevents mechanically such wrong operations as running off seal liquid in the impulse piping and overpressurizing to the one side of differential transmitter which might occur with the traditional three way manifold.
- Available in all direction : Either vertical or horizontal lines with short straight runs and easy to install.
- Wide variety of transmitters : Explosionproof type, pressure and temperature compensation type, and other types are available. You can make use of your transmitters also.