- Drift-free accuracy even in ionized environments
- Charged plate adapter available
- Model 282IS - Intrinsically safe (IS) meter
UL Certification Class I Division 1, Groups
A, B, C, D and Class II, Division 1, Groups
E, F, G
- Pulsing-beam range finder for always obtaining
the correct reading
- Exclusive Auto-Zero circuit
- HOLD button captures transient readings
- Recorder output and 40-hour battery
Thông số kỹ thuật
Display:
|
LCD, 3½digit with auto polarity
readout, with HOLD and LOW BATT
indicators
|
Accuracy:
|
~5% of reading, + zero offset, ~2 Isd
|
Analog output Amplitude:
|
1 V signal denotes 10kV reading at 1 inch for high impedance loads
|
Jack Type:
|
Accepts standard 3/32 inch
(2.5mm) monaural phone plug
|
Batteries:
|
V NEDA #1604 or equivalent,
Life: 40 hours of normal use, with
alkaline battery
|
Operating 050°C, 085% RH
Environment:
|
(noncondensing),
unaffected by ionized equipment
|
282IS Industrial Approval and certification:
|
CE mark approved
UL Certification Class I Groups A, B,
C, D, and Class II Groups E, F, G,
when powered by 9volt carbon zinc
or zinc chloride battery NEDA 1604
or NEDA 1604D.
UL Certification for Class I, Division 1,
Groups C and D only when powered
by 9volt alkaline NEDA 1604A.
|
Xem thêm:
Thiết bị đo tĩnh điện 282IS Monroe Electronics