Hotline: 0984.843.683 Email: info@ttech.vn  Zalo: 0984.843.683

Thiết bị giám sát rung động CM-1001 Sigma Electronics

Mã sản phẩm: CM-1001
Sử dụng cho Model:
Hãng SX: Sigma Electronics
Xuất xứ
Bảo hành
Tình trạng

Tình trạng: Còn hàng

Đặt hàng
Thiết bị giám sát rung động 
Model: CM-1001 
Hãng: Sigma Electronics (Nhật Bản)

Yêu Cầu Giá Tốt

Thông tin sản phẩm

- Data logging function with microSD card up to 32 GB.
- Data transfer to PC via USB port.
- LCD Screen image storage function
- 5 external inputs are equipped as standard for monitoring start, external resetting etc.
- Over-all vibration monitoring
- Number of Monitoring channel is 1.
- Acc-peak, Acc-rms, Acc-CF, Vel-rms, Disp-EQV are measured and monitored simultaneously. Alarm and Trip setting value are confirmed easily when monitoring.
- Alarm level and Trip level can set independently. Each level is set at 5% to 99.9% of full scale in 0.1% step.
- Alarm and Trip comparing delay time can be set from 0 to 9.9 seconds in 0.1 second step.
- Alarm and Trip resetting time can be set from 0 to 99.9 seconds in 0.1 second step.

- 5 external outputs are equipped as standard not only for alarm, trip but also sensor disconnection alarm etc.
Harmonic vibration analizing
Time waveform observation function
Frequency band monitoring
Unbalance vibration monitoring



Thông số kỹ thuật


Model CM-1001
Measuring range
Number of input channel 1
Applicable vibration sensor Piezoelectric accelerometer
option: Electro-dynamic vibration sensor (max. ±5V, input impedance 100kΩ)
option: Optical position detector (max. ±5V, input impedance 100kΩ)
Measuring and frequency range Acceleration: 0.1 to 40m/s² 10Hz to 20kHz ±3dB
Velocity: 0.1 to 200mm/s 10Hz to 1kHz ±1.5dB (based on JIS B0907-1989)
Displacement: 1.0 to 5000μm 10Hz to 1kHz±1.5dB
Measuring mode Acceleration: 0-peak, True rms, Crest Factor
Velocity: True rms
Displacement: derived peak-peak
Above data are indicated simultaneously and time graph is displayed.
Analysis and Monitoring mode
Over-all vibration monitoring Include
Frequency band monitoring option
Unbalance vibration monitoring option
Harmonic vibration analysis option
Time waveform observation function option
FFT analysis N/A
Thresholds
Setting range 5 to 99.9% of Full Scale. Each item of measuring mode.
Monitor output
Alarm Output when measured value exceed set alarm level
Trip Output when measured value exceeded set trip level
Power supply malfunction alarm Output when power supply lost
“Under monitoring” output This signal is active during monitoring
“Operation mode” output This signal indicates operation mode is “Remote” or “Local”.
Output rating Open collector output (DC30V 50mA)
Contact rating for power loss: DC24V,1A or AC125V,0.3A
External input
Command of start monitor Active only at remote operation
Reset command for alarm Alarm output is reset and Trip output not reset
Reset command for Trip Trip output is reset
Remote Local switching Switching Remote mode and Local mode
Command of Power On Power on at remote mode
Input rating Photo Coupler input (DC12V,10mA)
Others
USB Port Data transfer to PC, Storage LCD screen image
Data storage Storage of measured data in microSD card.
Storage LCD screen image(32GB Max.)
Display 3.5 inch TFT color LCD
Operation Dialog with touch screen
Environment Temperature: 10 to 30°C (without condensation)
Humidity: 20 to 80%
Power supply AC100 to 240V ±10% 50/60Hz
Dimension 170 (W)x 35.5 (L)x 95 (H)mm
Mass 350g
Accessories
Vibration sensor Piezoelectric Accelerometer, Model:P12SC (Sensitivity: 10pC/ (m/s²) )
Fixing magnet: KM-025C (Adsorption force 100N)
Connecting cable: LN-041 (2.5m)
Rotation sensor SFS-M1H
Fixing magnet: DG1030


Bình luận