PIE 334 Plus Process Loop Calibrator 4-20mA with loop leakage current detection
- Loop diagnostics mode measures loop leakage current, total loop resistance and AC voltage present in real time while the loop is in operation
- Much more responsive display makes for easier and faster adjustments
- Protective rubber boot for toolbox toughness
- 1000% improvement in battery life allows up to 125 hours of nominal use per battery change
- Source 0.00 to 24.00 mA (-25% to 125%)
- Read 0.00 to 52.00 mA (-25% to 300%)
- Simulate 2-Wire Transmitters 0.00-24.00mA
- Power and read 2-Wire transmitters 0.00-24.00 mA
- Better than ±0.025% of reading accuracy (± 1/2 lsd)
- Large, high contrast graphic display (.413” digits)
- EZ-Dial Knob - Easily adjust output by 0.01 mA
- EZ-Check Switch will instantly output 4.00 mA, 20.00 mA or dial knob user set output
- Slide switches allow for easy to use operation
|