| Specification |
DI-4B-25 |
| Measuring range |
0.30～25 N･m 3.0～250 kgf・cm 3.0～220 lbf・in |
Operative Measuring Range
at P-D Mode |
0.70 - 25 N.m 7.0 - 250 kgf.cm 7.0 - 220 lbf.in |
| Accuracy |
± 0.5% (in case of reading 499 or less = last digit +/- 3 reading) |
| Display |
Torque Meter |
LED Digital Display, 4 digits |
| Blow Counter |
LED Digital Display, 2 digits (Displayed only in P-P mode) |
| Measureing Direction |
CW, CCW selectable with a Switch |
| M'ment Mode |
P-P Peak |
Holding Peak Load Value |
| T-R Track |
Showing Real time torque value ( Used for Zero-Adjustment ) |
| P-D Peak down |
Holding Load Value at the moment to change from upward to downword |
| Blow Counter |
Count Range |
Zero to 99 blow |
| Count Time |
0.1 - 9.9 seconds |
| Automatic Clearance |
Automatically clear the displayed value after certain time (0.5 - 3.0 sec,selectable at each 0.5 sec). Setting 0.0 sec for manual Zero clearance |
| One-touch-Zero Clearance |
Easy Zero-Adjustment with pressing CLEAR button |
| Data output |
ASCII format USB Btype (Baud rate: 19200) |
| Power Supply |
Battery |
Ni-Cd Chargeable Battery 1.2V x 5 cells (700mAh) |
| Automatic PW off |
Automatically power off after 5 minutes left without operation |
| Charging time |
Within 3 hours |
| Continunous working time |
8 hours |
| Battery Life Time |
Chargeable more than 300 times |
| Weight |
2.1kg |
| Dimension |
150(W) x220(D) x74 (H) |
|
Accessories
(one piece each)
|
Bit Socket ( 6.35 HEX - Subtense 17mm ) |
| Measuring Joint : Hard Type (M10) & Soft Type (M10) |
| Socket for Wrenches ( Subtense 17mm ) |
| Dedicated AC/DC Adaptor (Charger), 230VAC or 120VAC |
| Exclusive receipt case |
An inspection report, a proofreading certificate,
traceability system figure |