| Specification |
NTS-6 |
| S-1 |
S-2 |
S-5 |
S-10 |
S-20 |
Measuring range
(at the time of Track) |
3.0～100
mN・m |
3.0～200
mN・m |
0.030～0.5
N・m |
0.030～1
N・m |
0.030～2
N・m |
| Accuracy |
±1 ％ |
| 2 mN・m or Less ±3dijit |
0.2 N・m or Less ±3dijit |
Rotational frequency
(at the time of no-load) |
85ｒｐｍ |
25ｒｐｍ |
13ｒｐｍ |
18ｒｐｍ |
18ｒｐｍ |
| Display |
The 4 figures digital display of LCD |
| The measurement direction |
CW-CCW Possible (right and left) It rotates by the motor. |
Measuring
mode |
Peak operation mode (PP):
Display the maximum under measurement . |
Truck mode (GO):
Always display the load torque which has started. |
RG mode (PD):
Carry out the data output of the load torque every 1/ 87 seconds. |
| Measurement start time |
Time after beginning rotation until it starts measurement is set up
(0.1 - 1 second). |
| Torque judging |
It is in measuring range and a setup of a maximum value and a minimum value is possible.[ O.K. Iｎ the Set point ] Lamp lighting : [ NG Outside the Set point ] Error buzzer |
| External input and output |
Signal output (open collector): O.K., NG
Data output: ASCII Format (baud rate9600), External start switch input |
| Power supply |
AC100V～240V |
| bit size |
φ 4 |
HEX6.35 |
| Outside size indicator |
165（W）×110（D）×58（H） |
| Outside size detector |
φ28×155 |
φ37×195 |
φ40×235 |
|
Accessories
(one piece each)
|
Inspection report, Proofreading certificate, Traceability system figure |