However, conventional air-discharge testing of these closely spaced pins is problematic because the airdischarge arc may jump to an adjacent pin instead of the pin intended for test. With an innovative robotic air-discharge adapter accessory, Teseq provides a tool which will prevent unintentional discharge paths. Furthermore, the approach speed, which is crucial for reliable air-discharge testing, can be programmed as a constant.
ESD testing of connectors often requires that each individual pin is tested for an extensive range of conditions including multiple discharges, polarities, voltage settings, and even R/C networks. Connector testing can take many hours or even days of monotonous, precise effort to complete. As a result, when this testing is done manually it is prone to errors. The advantage of robotic testing is that these procedures can be automated and precisely executed, ensuring a level of repeatability that cannot be achieved with manual testing.
Complete solution for robotic applications
Compact and specially designed housing
Unique robotic air-discharge adapter
Fully compliant with IEC/EN 61000-4-2 and ISO 10605
Thông số kỹ thuật
| Parameter |
Value |
|
Description
|
Compact ESD simulator with microprocessor-based, large touchsensitive LCD panel, built-in HV relay for contact-discharge, battery and mains operation
|
|
Basic set
|
Carrying case with: discharge pistol, cradle for discharge pistol, high voltage base unit with built-in battery pack, mains adapter and battery charging unit (100 to 250 VAC), discharge network 150 pF/330 Ω, air- and contact-discharge tips, grounding cable,user manual
|
|
Pulse data
|
Standard: conforms to IEC/EN 61000-4-2 (2001)
Special: interchangeable networks for other standards
|
|
Standard pulse networks
|
Network 150 pF/330 Ω as per IEC/EN 61000-4-2
Optional ISO 10605 networks 150 pF/2 kΩ and 330 pF/2 kΩ
Range of R/C networks for other standards as accessories:
R = 0 to 20 kΩ; C = 50 to 2000 pF
|
|
Discharge voltage
|
Air-discharge: 200 V to 30 kV (in 100 V steps)
Contact-discharge: 200 V to 30 kV (in 100 V steps)
|
|
Discharge tips
|
Ball and point as per IEC, exchangeable by threaded cap
|
|
Charging voltage measurement
|
kV, air-discharge, dynamic accuracy better than ±5%
|
|
Discharge detection (air-discharge only)
|
Indicated by the kV symbol being displayed in inverse, also acoustically in the ‘Single’ operating mode
|
>>> Gia ban NSG 1007 cua teseq chinh hang
|