Feature
- Free drop in precise posture
The table which carried a specimen carries out fall operation holding the product, and free-drop for a specimen in precise posture.
- Controll drop height
The drop height of packaged cargo is performed by digital set-up of a control device, and risen to specification height by motor-brock, and is separated by drop switch after holding a position in air brake.
- Anti-rebound of drop table
When the specimen table is dropping to base, the shock absorber and the air brake will stop the table rebound as the table will be stored in the groove of base and be kept from bounding on the base upper surface.
- Taiking care for safty use
The drop operation cannot be activated when the the specimen table does not set to drop height position.
In order to prevent unprepared drop operation, drop test is operated by two push-button switches.
As accessories, equip the base with Photoelectronic Sensor, it will stop drop test when it detects worker's leg and something on the base.
Applications
Heavy packaged cargo of free drop test from a minimum of 1 cm to 100 cm is available.
Specification
| Model |
DT-300 |
| Specimen max weight |
300 kg |
| (approx lbs) |
661 lbs |
| Specimen max size (mm) |
W1600 x D1200 x H1500 |
| (approx inch) |
W63 x D47 x H59
|
| Drop height range |
50 mm up to 1000 mm |
| (approx inch) |
2.0 inch up to 39 inch |
| Drop attitude |
Digital setup by a controller |
| Drop height setting |
Digital setup by a controller |
| Brake of lifting table |
Shock absorber and Counter-pressure brake |
| Size |
W1700 x D1800 x H2600 |
| (approx inch) |
W67 x D70 x H102 |
| Capacity |
3600 kg |
| (approx lbs) |
7920 lbs |
| Power supply |
AC200V 3 phase 7A |
| Air pressure |
0.7 MPa or more |
| Applied Standards |
JIS Z 0200, JIS Z 0202, ISO 2248 |
|