- Sturdy design and perfect corrosion prevention are ensured by a self-supporting outer jacket made of galvanized steel sheet with hard and resistant baking varnish on the outer side. The inner double-jacket chamber and the door panel are made of high-quality stainless steel (DIN 1.4301, AISI 304). Inner walls and the door panel are provided with a highly resistant Epolon-coating for higher protection. For the purpose of energy saving and minimizing the heat radiated to the ambient air the chamber is perfectly insulated with an ecological insulating material. The inner walls of the chamber can be easily removed without using any tool, e.g. for the purpose of cleaning. On top of that the chamber has a continuously adjustable air flap and can be provided with a door with window and an interior lighting on request. The door is secured at four points for perfect tightening.
- The cost-effective drying oven series DUROCELL with the chamber volume of 22, 55, 111 and 222 litres, working temperature from +5 °C above ambient temperature up to 125°C, precise temperature control and stainless chamber protected by coating of highly resistant plastic Epolon, is suitable for work with acids and liquors, for acid and basic hydrolysis etc. The series DUROCELL is characterized by perfect corrosion prevention of all chamber parts, noiseless run and soft air ventilation within the chamber. This device offers high operating comfort, precise control and short times of temperature recovery in the chamber after door opening. The devices DUROCELL meet requirements of technical-legislative regulations in CZ and EU.