Hotline: 0984.843.683 Email: info@ttech.vn  Zalo: 0984.843.683

Vibration Analyzer, Dynamic Balancer & Data Collector M30 Erbessd instruments

Mã sản phẩm: M30
Sử dụng cho Model:
Hãng SX: Erbessd instruments
Xuất xứ
Bảo hành
Tình trạng

Tình trạng: Còn hàng

Đặt hàng

DigivibeMX® M30 offer dynamic balancing tools and functions for both in situ and balancing machines. With a single click you start balancing. Its automated tracking filter allows to identify the RPM in a selected range to avoid inaccuracies caused by slightly changes of speed. The balancing speed range varies from 60 to 150,000 RPM with signal recording times of up to 5 minutes 1.

 

Yêu Cầu Giá Tốt

Thông tin sản phẩm

DigivibeMX® M30 includes the following vibration analysis tools:


3D Waterfalls
3D ODS Simulations
Routes Analysis
Barcode creator and reader
Automatic reports 2
Color-based database
Colored Indicators for general Vibration and Bearing problems
Tendency curves with tendency analyzer
Machinery condition statistics
Database compatibility and synchronization
3D Waterfall
FFT
Phase
Orbits
Bode
Cross Power Spectrum
Frequency Response
Coherence function
Spectrograph
Cross by Zero frequency


2-Channel Interface
  • 4-pin LEMO® Connectors
    (Ch 1-A, Ch 1-B, Ch 2/Op & USB)
  • Active Plane Indicator
    (LED 1-A & LED 1-B)
  • Channel Auto Switching*
    *Only with DigivibeMX® 10
  • IP 67 Protection grade
  • 4-pin LEMO® to USB Cable (1m/3ft)
  • Weight: 153g
  • Dimensions: 79 x 70 x 24 mm
  • Cables
  • 1 Shielded monoaxial cable with 5-pin LEMO® connectors for Optical Sensor and Calibrator (2m/6ft)
  • 2 Shielded monoaxial 5-pin LEMO® to 2-pin cables for accelerometers (2m/6ft)
  • 2 Accelerometers
  • Dinamyc Impact Shock: 50g peak (max shock 5000g)
  • Freq. response (+/- 3dB): 0.32 - 135000 Hz
  • Freq. response (+/- 5%): 2 - 10000 Hz
  • Sensitivity: 100 mV/g +/- 10%
  • Transverse sensitivity: < 5%
  • Power supply: 18-30 V / 3-8 mA
  • Short-circuit protection
  • Operation temp.: −10 - 50 °C
  • Protection grade: IP 65
  • Impact resistance: IEC 60028-27
  • Standard 2-Pin MIL connector
  • Includes 2-Pin to 5-Pin LEMO® cable and Magnetic Base
  • Weight 50g
  • Stainless steel body
  • 1 Laser Tachometer
  • Analogic output
  • Range: 1 - 5000 Hz
  • Power supply: 5 V
  • Current: 20 - 30 mA
  • Voltage drop: <0.4 V
  • Short circuit protection
  • Reverse current protection
  • Over-Voltage protection: 15V for 1 minute
  • Operating temp: −10 - 50 °C
  • Storing temp: −40 - 85 °C
  • Protection grade: IP 67, III
  • Impact Resistance: IEC 60028-27
  • Operation Distance: Up to 15 m
  • Weight 60 g
  • Designed in Nylamid
  • 1 Calibrator
    Soft Case & Magnetic Base
    Installation CD
    & User Manual
    See system requirements below

    Bình luận