The top-exit 100 mV/g sensor is designed for monitoring areas with limited space. The general purpose accelerometer is ideal for monitoring machine vibration on a wide range of rotating equipment such as motors, pumps, fans, compressors, turbines and generators. A 316L stainless steel casing provides rugged durability for most extreme environments. The sensing element is housed in a case-isolated Faraday shield, providing maximum protection from ground loops and RF interference
Lightweight for walkaround programs
• Prevents ground loops in permanent mount applications with proper cabling
• Can be submersed with proper connector
• Hermetically-sealed
• ESD-protected
• Reverse wiring protection
• Manufactured in an approved ISO 9001 and AS9100 facility
SPECIFICATIONS
Model |
|
780B |
780C |
Dynamic Specifications
|
Sensitivity, 25 °C:
|
100 mV/g
|
Sensitivity tolerance:
|
±10 %
|
±15 %
|
Range:
|
±80 g peak
|
Linearity:
|
1 %
|
Frequency range:
|
±5 %
|
3 … 5000 Hz
|
|
±10 %
|
1 … 9000 Hz
|
|
±3 dB
|
0.5 … 14000 Hz
|
Resonance frequency:
|
30 kHz
|
Transverse sensitivity, max.:
|
5 % of axial
|
Temperature response:
|
-25 °C
|
-10 %
|
|
+120 °C
|
+10 %
|
Electrical Specifications
|
Supply voltage:
|
18 … 30 VDC
|
Constant current supply:
|
2 … 10 mA
|
Residual noise, equivalent g, nom.:
|
Broadband 2.5 Hz … 25 kHz
|
700 µg
|
|
Spectral 10 Hz
|
10 µg/√Hz
|
|
Spectral 100 Hz
|
5 µg/√Hz
|
|
Spectral 1000 Hz
|
5 µg/√Hz
|
Output impedance, max.:
|
100 Ω
|
BIAS output voltage:
|
12 VDC
|
Grounding:
|
Case isolated, internally shielded
|
Environmental specifications
|
Operating temperature range:
|
-50 … +120 °C
|
Vibration limit:
|
500 g peak
|
Destruction limit:
|
5000 g peak
|
Electromagnetic sensitivity, equiv.g, max.:
|
70 µg/gauss
|
Environmental sealing:
|
hermetic
|
Base strain sensitivity, max.:
|
0.0002 g/µstrain
|
Physical Data
|
Sensing element design:
|
PZT ceramic, shear
|
Weight, nominal:
|
62 grams
|
Case material:
|
316L stainless steel
|
Mounting:
|
¼-28 UNF tapped hole
|
Output connector:
|
2-pin, MIL-C-5015
|
Mating connector:
|
Type R6
|
Recommended cabling:
|
J10 or J9T2A
|