| Electrical specifications |
| I / O characteristics are specified when input voltage AC 200 V 50 Hz. |
| input |
Number of phases |
Single-phase |
| frequency |
50/60 Hz |
| Power consumption |
About 5.5 kW or less (at full load) |
| About 0.4 kW or less (no load) |
| Rated voltage |
AC 200 V ± 10% |
| output |
Rated time |
Half an hour |
| capacity |
5 kVA |
| Voltage |
AC 0 to 100 kV |
| ground |
One end ground |
| voltmeter |
DPM AC 0 to 100.0 kV ± 1.5% FS
Sample hold / peak hold
upper limit voltage setting
Available setting range AC 0 to 110.0 kV ± 5% FS |
| ammeter |
DPM AC 0 to 75.0 mA ± 1.5% FS |
| Boost method [Automatic] / [Manual] |
[Automatic] Automatically boost up to the upper limit set voltage after START, Automatic buck at the time of arrival Automatic buck
at the time of overcurrent After voltage hold, output OFF OFF Automatic buck |
[Manual] After step START, pushbutton operation Manual buck-boost Overvoltage
hold after voltage hold, output OFF |
| Boost speed |
500 - 750 - 1000 V / sec ± 10% (Can be finely adjusted about ± 5%) |
| Step down speed |
About 5 kV / sec (± 20%) (Fixed fine adjustment is impossible) |
| Cutoff current |
10 - 20 - 30 - 40 - 50 mA ± 5% |
| External input / output |
"DoorSW" input |
Terminal number (TB 2 - 9, 10)
Output ON with short circuit possible |
| Voltmeter terminal |
Terminal number (TB 2 - 1, 2)
External voltmeter (0 - 100 kV / 0 - 100 V) |
| Ammeter terminal |
Terminal number (TB 2 - 3, 4)
Not used Short circuit
(factory short circuit) |
| |
| General specification |
| Model name |
ITS-A100050AZ |
| External dimensions |
Operation part Approx. W 520 × D 400 × H 621 (mm) |
| About transformer part W 500 x D 780 x H 1710 (mm) |
| mass |
Operating part Approximately 52 kg |
| Transformer section Approximately 400 kg or less |
| Paint color |
Operation unit |
Case Munsell 5Y7 / 1 Gs50 (half gloss) |
| Panel Munsell N - 9 Gs 50 (half gloss) |
| Transformer section |
Munsell 5Y7 / 1 Gs50 (half gloss) |
| Withstand voltage |
Input - case AC 1500 V / min |
| Insulation resistance |
Input-case DC 500 V 20 MΩ or more |
| environment |
Installation location |
Indoor (no corrosive / flammable gas) |
| Operating temperature · humidity |
0 to 40 ° C · 0 to 80% (with no condensation) |
| Storage temperature · humidity |
-10 to 50 ° C · 0 to 80% (with no condensation) |