| Withstanding Voltage |
AC 5500V 1 minute max. (Between the core of CT and outer case) |
| Storage Temperature |
-10℃ to 60℃, 70%RH max. ( Without condensation ) |
| Accuracy |
(23℃±5℃, 80%RH or less)
Function/Range/Accuracy/Maximum input
AC A (50/60Hz) Manual ranging/20A/±1.2% rdg ±10 dgt/AC600A
AC A (50/60Hz) Manual ranging/200A/±1.2% rdg ±10dgt/AC600A
AC A (50/60Hz) Manual ranging/600A/±1.0% rdg ± 8 dgt/AC600A
AC V (50/60Hz) DC V Auto ranging/2V/±0.7% rdg ± 5 dgt/DC 600V or AC 600V rms
AC V (50/60Hz) DC V Auto ranging/20V/±1.2% rdg ± 5 dgt/DC 600V or AC 600V rms
AC V (50/60Hz) DC V Auto ranging/200V/±1.2% rdg ± 5 dgt/DC 600V or AC 600V rms
AC V (50/60Hz) DC V Auto ranging/600V/±1.2% rdg ± 5 dgt/DC 600V or AC 600V rms
Resistance(Ω) Auto ranging/200Ω/±1.2% rdg ± 5 dgt/Input protection 250V rms (30 second)
Resistance(Ω) Auto ranging/2kΩ/±1.2% rdg ± 5 dgt/Input protection 250V rms (30 second)
Resistance(Ω) Auto ranging/20kΩ/±1.2% rdg ± 5 dgt/Input protection 250V rms (30 second)
Resistance(Ω) Auto ranging/200kΩ/±1.2% rdg ± 5 dgt/Input protection 250V rms (30 second)
Resistance(Ω) Auto ranging/2000kΩ/±1.2% rdg ± 5 dgt/Input protection 250V rms (30 second)
Resistance(Ω) Auto ranging/20MΩ/±3.0% rdg ±10 dgt/Input protection 250V rms (30 second)
Continuity check/2kΩ/Beeper < Approx. 300Ω/250V rms
Diode test/2V/±10% rdg ± 3dgt/250V rms |
| Operating Temperature |
0℃ to 40℃, 80%RH max. ( Without condensation ) |
| Power supply |
1.5V (AM-4, LR03 or AAA)×2 |
| Power consumption |
3.5mW |
| Weight |
Approx. 425g |
| Safety standard |
IEC 61010-1, IEC 61010-2-032
Installation CategoryⅢ600V phase to earth |
| Jaw opening capability |
40mmφ |
| Size |
70(W)×223(H)×34(D)mm |
| Accessories |
Hard carrying case：1
Instruction manual：1
Test lead：1set
Batteries：2 |
| Display |
3.5 digit LCD, max. reading of 1999 |
| Over range indication |
Blanking of all digits except MSD 1 |
| Data hold indication |
"DH" mark on LCD |
| Low battery indication |
"Battery" mark on LCD |
| Auto power off |
Approx. 10 minutes later after power on |
| E.M.C. standard |
EN 61326 |
| Measuring method |
Dual slope integration mode |
| Battery life |
Approx. 500 hours continuous |
| Sampling |
2 times/sec |