- Bearing-free and therefore wear-free
- Digital or analogue interfaces
- Resolution 4096 steps/revolution, measuring range up to 32,768 revolutions
- Axial offset of the external magnet (Ø 12 mm) up to 20 mm
- Radial offset of the external magnet (Ø 12 mm) up to ± 3 mm
- Can also be used in rough environments and underwater
- Available with various housing versions (Ø 22; Ø 36, Ø 42; Ø 50)
- The electronics consist of an ASIC with Hall elements and the signal processing system. The external magnet's magnetic field acts through the closed housing. To increase the protection type and shock resistance, the rotary encoder can be completely cast-in.
- The bearing-free rotary encoders are based on our various electromagnetic rotary encoder model series. For the electrical data for the corresponding model series, please refer to the listed data sheets, each of which can be found on our homepage
- The rotary encoders described here consist of a sensor housing and a separate magnet. The magnet is connected to the output shaft of an actuator, a joint or a drive. There is no mechanical connection to the rotary encoder. The rotary encoder is manufactured with various housings. The housings are available in stainless steel for use under particularly aggressive environmental conditions or in the foodstuffs and hygiene sectors.