- Contactless, wear-free sensor system according to the Hall principle
- CANopen interface according to CiA, Device Profile for Encoders DS 406
- Model TKN: construction set consisting of printed circuit board and magnet
- Resolution: 4096 steps / 360° (12-bit)
- Single or multiturn versions (up to 4096 revolutions)
- Operating temperature: - 40 °C to + 85 °C
- Optionally with speed signal
- Other PCB types are possible on request
- Sensor system: ASIC with Hall elements (12-bit resolution)
- EMC standards: EN 61 000-6-4 interference emission EN 61 000-6-2 interference immunity
- Operating voltage range: + 17 VDC to + 26 VDC
- Operating current: 70 mA typ. / 100 mA max.
- Resolution: 4096 steps / 360°<) - (12-bit)
- Max. measuring range: 4096 revolutions - (12-bit) (in the multiturn version only)
- Linearity: ≤ ± 0.25 % (of 1 revolution)
- Reproducibility: ≤ ± 0.02 %
- Temperature drift: < ± 0.2 % (of 1 revolution for the entire temperature range)
- Maximum radial / axial offset of the position magnet: Magnet RM44: 0.1 mm, magnet RM12-4: see next page
- Output code: Binary
- Code path: CW / CCW
- Reference value: 0 to (total number of steps -1)
- Speed signal: Steps / time unit, 16-bit signed value (time unit (gate time) adjustable, default: 100 ms)
- CAN interface: According to ISO/DIS 11898
- Address setting: Via SDO or LSS
- Terminating resistor: To be implemented separately
- Max. transmission length: 200 m*