Cảm biến áp suất - NS100A series - Minebea

Tình trạng: Còn hàng

Số lượng:

Liên Hệ Hỗ Trợ

SĐT: 0984 843 683

Cảm biến áp suất

Model : NS100A

Hãng sản xuất :Minebea


Rated capacity	200 kPa ~ 50 MPa
Safe overload	200 %R.C.
Ultimate overload	300 %R.C.
Accuracy	0.2 %R.O. (including non-linearity, hysteresis and repeatability)
Rated output	Current : 4 mA ~ 20 mA (2 wires method, Load resistance 500 ohm or less, at 24 V) Voltage : 0 V ~ 10 V (Load resistance 5 k-ohm or more)
Response frequency	1 kHz
Power supply voltage	DC 24 V(18 V ~ 28 V)
Power consumption	Approx. 30 mA
Insulation resistance	1 000 MΩ or more (DC 50 V)
Temp. range, compensated	-20 ℃ ~ 70 ℃
Temp. range, safe	-30 ℃ ~ 80 ℃
Temp. effect on zero	0.2 %R.O./10 ℃
Temp. effect on output	0.2 %LOAD/10 ℃
Cable	φ4.7, 2 m shielded cable directly attached, Cable end separated (Cable attached type)
Connector	R03-RB5F(receptacle)
Class of protection	IP44 or equivalent
Material of pressure hole	Stainless steel
Material of cover	Alluminium alloy (with almite processing)
Material of pressure diaphragm	Single crystal sapphire, etc.,
Mounting screw	G3/8{PF}
Weight	Approx. 200 g
Tightening torque	20 N･m ~ 40 N･m {2.04 kgf･m ~ 4.08 kgf･m}
Special specification	NS100A-D6 : Guranteed accuracy 0.2 %R.O. at negative side. Power supply voltage : ±DC15 V NS100A-H : As an amplifier part is are separated.(The highest, environmental temperature is 200 ℃) NS100A-S70 : IP67 waterproof construction with zero adjustment factor) NS102 : Pressure inlet port : φ10