Hotline: 0984.843.683 Email: info@ttech.vn  Zalo: 0984.843.683

Máy thử kéo nén - Technograph TGI series - Minebea

Mã sản phẩm: Technograph TGI series
Sử dụng cho Model:
Hãng SX: Minebea
Xuất xứ
Bảo hành
Tình trạng

Tình trạng: Còn hàng

Đặt hàng

Máy thử kéo nén

Model : Technograph TGI series

Hãng sản xuất  :Minebea

Liên Hệ Hỗ Trợ

SĐT: 0984 843 683

    • Mail: info@ttech.vn

      Zalo: 0984.843.683


Thông tin sản phẩm

Máy thử kéo nén

Model : Technograph TGI series

Hãng sản xuất  :Minebea

 仕様  
Model TGI-250kN TGI-100kN TGI-50kN TGI-10kN TGI-5kN TGI-1kN TGI-500N TGI-200N
Maximum test force 250 kN 100 kN 50 kN 10 kN 5 kN 1 kN 500 N 200 N
Test force measure -ment range *1) 0.1N~
250kN
0.1N~
100kN
0.1N~
50kN
0.1N~
10kN
0.1N~
5kN
0.1N~
1kN
0.1N~
500N
0.1N~
200N
Test space Tensile / compression testing beneath the movable crosshead. 
(A model is available allowing tensile testing above the movable crosshead (Optional).)
Loading method Constant-speed strain loading with highly accurate AC servo motor and backlash-free precise ball screw.
Cross head speed / permissible test force Within the max. test force over the entire speed ranges.
Test force range 2 methods:
AUTO: (accuracy guranteed for 1/1 to 1/250 of load cell capacity)
100: (accuracy guranteed for 1/100 to 1/1 000 of load cell capacity)
Test force display 5-digits digital display ±99,999
AUTO range: Resolution 1/5000, test force reduction increase/decrease, Full scale display, and automatic switching of decimal point position and display unit.
100 range: Resolution 1/10000
* Test force display varies depending on the load cell provided.
Test force measuring accuracy (Guaranteed accuracy range) Standard accuracy : ±1 % of indicated value 
(1/1 to 1/1000 of load cell capacity) 
High accuracy : ±0.5% of indicated valeu (Optional) 
(1/1 to 1/1000 of load cell capacity)
* Test machine must be in location free of vibration
Applicable standard JIS B 7721 Class 1 or Class 0.5 and ISO7500-1 Class 1 or Class 0.5
Effective test width (Note 2) (mm) 600 600 420 430
Cross head stroke (mm) 1 550 1 350 1 015 1 090
Maximum mounting space (mm) 1 690 1 555 1 165 1 160
Tensile stroke (Note 3) (mm) 620 850 470 710 820 870 890 910
Crosshead speed 0.000 5 to 500 mm/min
0.1 to 500 mm/mincan be set in 0.1 mm/min incliments. Below this, can be set in 9 steps: 0.05, 0.03, 0.02, 0.01, 0.005, 0.003, 0.002, 0.001, and 0.0005.
0.000 5 to 1 000 mm/min
0.1 to 1 000 mm/min; can be set in 
0.1 mm/min increments. Below this, can be set in 9 steps: 0.05, 0.03, 0.02, 0.01, 0.005, 0.003, 0.002, 0.001, and 0.0005.
Crosshead speed accuracy ±0.1 % over entire speed range
Return speed Can be set as required between 0.1 mm/min and 750 mm/min Can be set as required between 0.1 mm/min and 1 500 mm/min
Speed setting method Manual: Numeric input via control panel
When using data processing software: Automatically set in accordance with test conditions created.
Manual speed 3 speeds (HIGH/MIDDLE/LOW); each freely settable
Test mode Single and cycle (Combination of test force and position)
Optional: Creep, Automatic loading
Test force display 5 digit digital display ±99 999
Auto range: Resolution 1/5 000, test force reduction increase/decrease, full scale display, and automatic switching of decimal point position and display units
100 range: Resolution 1/10 000 * Test force display varies depending on the load cell provided.
Movable crosshead position display 6 1/2-digit digital display ±1999.999
Standard function
Load cell model & capacity
Auto adjust
Load cell span

Auto set for tension & compression

Zero point
One push
Position reset One push
Sample rupture detection
Selectable from stop, reverse and ignore
Rupture sensitivity
Set as desired to 0.04 % to 99.00 % of test force
Test condition registration function
10 conditions
Test force & position analog output
DC0 ~ DC5 V (with scaling function)
Interface
Conforms to USB interface 2.0/1.1 standard (B- type connector)
Options
Chuck adapter
Lower chuck mounting adapter for tensile testing
Load cell

for tension / compression type 
(with universal joint, connect pin and compression plate
----------
for tensile type
(with universal joint and connecting pin)
----------
for compression type
(with for compression plate)

Testing jig
Former jig is attachable.
Displacement measuring function
Strain input type
Test machine stand
Data processing software
Standard (Tensile / compression / bending), Peeling, Cycle (One way, Both way), 
Stress relaxation
External dimensions (WxHxD)(mm) 1420 x 2406 x 894 1221 x 2192 x 720 900 x 1507 x 490 700 x 1583 x 523 700 x 1 583 x 513
(without level adjuster)
Approximate weight (kg) 1 200 900 310 120
Power supply voltage, Frequency 3-phase AC200 V to 230 V+10 % to 15 %, 50/60 Hz Single phase AC100 V to 115 V+10% to -15%, 50/60 Hz
Power consumption (W) 7.5 k 2.9 k 1.8 k 750 400
Operating temperature / humidity range Temperature 5 ℃ ~ 40 ℃, 
Humidity 20 % ~ 80 %RH (with no condensation)


Bình luận