Constructional design / case
Design: |
- Field housing IP 65 or IP 67, with cable gland
- Right-angle plug per EN 175301-803-A (DIN 43650, model A), IP 65
- Cable connection IP 67
- Circular connector M12, IP 65 |
Construction: |
Electronics unit encapsulated with silicone |
Material: |
Stainless steel mat.-no. 1.4301 (304) |
Pressure compensation: |
Inner chamber aeration for measuring ranges < 16 bar over case thread or connection cable (depending on design) |
Weights: |
- Case with connector: approx. 200 g
- field housing: + approx. 260 g
- with temperature decoupler: + approx. 50 g |
Output
Signal: |
4…20 mA, 2-wire technology |
Adjusting range: |
approx. ± 5 % f.s., zero point and measuring span separately adjustable |
Delay: |
≤ 20 ms |
Current limitation: |
≤ 30 mA |
Load, RB: |
RB ≤ (UV-6V)/0.02A [KOhm]
UV = supply voltage |
Load influence: |
for load change 500 Ohm:
≤ 0.1 % f.s. |
Process connection
Design: |
See order details |
Diaphragm: |
Stainless steel mat.-no. 1.4404 (316L) |
Socket: |
Stainless steel mat.-no. 1.4404 (316L) |
Material wetted parts
Sensor : |
Piezoresistive |
Thin film |
Sensor diaphragm: |
1.4404/1.4435 (316L) |
1.4542 (630) |
Socket: |
1.4404/1.4435 (316L) |
1.4301/1.4404 (304/316L) |
Measuring system
Sensor: |
Piezoresistive |
Thin film |
Sensor filling: |
Synthetic oil, free of silicone FD1, FDA listed |
without |
|