Cảm biến đo áp suất CV3110 Labom

Mã sản phẩm:	CV3110
Sử dụng cho Model:
Hãng SX:	Labom
Xuất xứ
Bảo hành
Tình trạng

Tình trạng: Còn hàng

Số lượng:

Đặt hàng

Yêu Cầu Giá Tốt

0984.843.683

Email: hien@ttech.vn

Thông tin sản phẩm

Material wetted parts

Material:	Stainless steel mat. no. 1.4435 316L/316
Gasket:	EPDM-FDA listed (in case of flush mounted diaphragm with O-ring)

Measuring system

Sensor:	Piezoresistive measuring element
System filling:	Synthetic oil, free of silicon FD1, FDA listed, class USDA-H1

Hygienic design

The surface quality of wetted parts is of major importance.
The hygienic type device (Code: HY) guarantees the following surface roughness values:

Diaphragm foil: Ra ≤ 0.4 μm

Laser welds: Ra ≤ 0.8 μm

Turned parts: Ra ≤ 0.8 μm

Further versions of hygienic design upon request.

Accuracy

General:	Limit point setting:	per DIN 16086
	Reference conditions:	per EN 60770-1
	Linearity errors:	≤ 0.15 % of span TD 5:1 no modification
	Hysteresis:	≤ 0.05 % of nominal range
	Repeatability:	≤ 0.05 % of nominal range
	Calibration position:	Vertical mounting position
	Influence of mounting position:	≤ 3.5 mbar
	Long-term drift (EN 60770-1):	≤ 0.1 % / year of nominal range
Temperature effect:	Case:
	Lower range value / upper range value
	Range 0…60 °C:	± 0.15 % / 10K of nominal range
	Range < 0 °C, > 60 °C:	± 0.2 % / 10K of nominal range
	Process connection: (depending on design)
	Diaphragm seal: DN 25/1“ DN 32/1 1/2“ DN 40 DN 50/2“ HYGIENIC G1A	Zero point error: 4.8 mbar/10K 2.3 mbar/10K 1.6 mbar/10K 0.6 mbar/10K 1 mbar/10K

The specify zero error for the process connection is a guide value for a standard design. We can provide a detailed system calculation upon request. Systems with reduced diaphragm seal errors are also available.